This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

CD74HC4017M96

Counter/Divider Single 5-Bit Decade UP 16-Pin SOIC T/R

Manufacturer:

TI
Mfr.Part #:

CD74HC4017M96
Datasheet:

CD74HC4017M96 Datasheet (PDF)
Function:

Counter
Bits (#):

10
Technology family:

HC
Supply voltage (min) (V):

2
EDA/CAD Models:

Request Free CAD Models for CD74HC4017M96

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

CD74HC4017M96 General Description

The HC4017 is a high speed silicon gate CMOS 5-stage Johnson counter with 10 decoded outputs. Each of the decoded outputs is normally low and sequentially goes high on the low to high transition clock period of the 10 clock period cycle. The CARRY (TC) output transitions low to high after OUTPUT 10 goes low, and can be used in conjunction with the CLOCK ENABLE (CE\) to cascade several stages. The CLOCK ENABLE input disables counting when in the high state. A RESET (MR) input is also provided which when taken high sets all the decoded outputs, except "0", low.

The device can drive up to 10 low power Schottky equivalent loads.

Key Features

Fully Static Operation
Buffered Inputs
Common Reset
Positive Edge Clocking
Typical f_MAX = 50MHz at V_CC =5V,C_L = 15pF, T_A =25°C
Fanout (Over Temperature Range)
- Standard Outputs. . . . . . . . . . . . . . . 10 LSTTL Loads
- Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads
Wide Operating Temperature Range . . . -55°C to 125°C
Balanced Propagation Delay and Transition Times
Significant Power Reduction Compared to LSTTL Logic ICs
HC Types
- 2V to 6V Operation
- High Noise Immunity: N_IL = 30%, N_IH = 30% of V_CC at V_CC = 5V

Specifications

Function	Counter	Bits (#)	10
Technology family	HC	Supply voltage (min) (V)	2
Supply voltage (max) (V)	6	Input type	Standard CMOS
Output type	Push-Pull	Features	Balanced outputs, High speed (tpd 10-50ns), Positive input clamp diode
Operating temperature range (°C)	-55 to 125	Rating	Catalog