Payment Method
DLPC350ZFF +BOM
Digital Controller for DLP4500 DMD and DLP4500NIR DMD
BGA-419-
Manufacturer:
-
Mfr.Part #:
DLPC350ZFF
-
Datasheet:
-
Programmable:
Not Verified
-
Type:
Digital Controller
-
Applications:
Image Processing and Control
-
Mounting Type:
Surface Mount
-
EDA/CAD Models:
Availability: 6805 PCS
Please fill in the short form below and we will provide you the quotation immediately.
DLPC350ZFF General Description
The DLPC350 digital controller is required for reliable operation of the DLP4500 or DLP4500NIR digital micromirror device (DMD). The DLPC350 controller provides a convenient, multi-functional interface between user electronics and the DMD, enabling high-speed pattern rates, along with LED control and data formatting for multiple input formats.
The DLPC350 controller provides input and output trigger signals for synchronizing displayed patterns with a camera, sensor, or other peripherals. The controller enables integration into small-form-factor and low-cost light steering applications. Applications include 3D scanning or metrology systems, spectrometers, interactive displays, chemical analyzers, medical instruments, and other end equipment that requires spatial light modulation (light steering and patterning).
The DLPC350 controller is the data formatting and DMD controlling ASIC for either the visible or near-infrared (NIR) version of the DLP4500. For further details, please see the DLPR350 firmware homepage, the DLP4500 data sheet, and the DLP4500NIR data sheet.
Key Features
- Required for reliable operation of the DLP4500 and DLP4500NIR DMDs
- High-speed pattern display mode
- 1-Bit binary pattern rates to 4225 Hz
- 8-Bit grayscale pattern rates to 120 Hz
- 1-to-1 input mapping to micromirrors
- Multiple bit depths and LEDs in pattern sequences
- Easy synchronization with cameras and sensors
- Two configurable input triggers
- Two configurable output triggers
- 14 fully programmable GPIO signals
- 64 Mb internal RAM
- Stores up to 48 1-bit patterns
- No external volatile memory required
- Supports up to 32 MB external parallel flash for increased pattern storage
- Multiple configuration interfaces
- One USB V1.1 slave port
- Two I2C ports
- LED PWM generators
- Video display mode of operation
- 10- to 120-Hz full color frame rates
- YUV, YCrCb, or RGB input data formats
- Integrated micromirror drivers
- Integrated clock generation
Specifications
Category | Integrated Circuits (ICs)Specialized ICs | Series | - |
Programmable | Not Verified | Type | Digital Controller |
Applications | Image Processing and Control | Mounting Type | Surface Mount |
Base Product Number | DLPC350 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 6,805
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for DLPC350ZFF, guaranteed quotes back within 12hr.
Top Sellers
-
ADS1115IDGST
Texas Instruments
1000+ $1.850
-
ADS1115IDGSR
Texas Instruments
1000+ $1.131
-
PCM2704
TI
98dB SNR Stereo USB2.0 FS DAC with line-out and S/PDIF output, Bus/Self-powered (Ext. ROM Interface)
-
ADS1258
TI
24-bit, 125kSPS, 16-ch delta-sigma ADC with fast channel scan and automatic sequencer
-
PCM56P
Texas Instruments
DAC, Audio 16 b PCM 16-PDIP
There is a little unwashed flux on the contacts of quartz, otherwise in appearance all the norms. How to check in the case i leave additional. Feedback.