Payment Method
DSPIC33EV32GM104-E/PT
dsPIC Automotive, AEC-Q100, dsPIC™ 33EV, Functional Safety (FuSa) Microcontroller IC 16-Bit 60 MIPs 32KB (11K x 24) FLASH 44-TQFP (10x10)
-
Manufacturer:
-
Mfr.Part #:
DSPIC33EV32GM104-E/PT
-
Datasheet:
-
Series:
Automotive, AEC-Q100, dsPIC 33EV
-
Packaging:
Tray
-
Operating-Temperature:
-40°C ~ 125°C (TA)
-
Number-of-I-O:
35
-
EDA/CAD Models:
Availability: 5242 PCS
Please fill in the short form below and we will provide you the quotation immediately.
DSPIC33EV32GM104-E/PT General Description
dsPIC Automotive, AEC-Q100, dsPIC™ 33EV, Functional Safety (FuSa) Microcontroller IC 16-Bit 60 MIPs 32KB (11K x 24) FLASH 44-TQFP (10x10)
Key Features
- Operating Conditions
- 4.5V to 5.5V, -40ºC to +85ºC, DC to 70 MIPS
- 4.5V to 5.5V, -40ºC to +125ºC, DC to 60 MIPS
- 4.5V to 5.5V, -40ºC to +150ºC, DC to 40 MIPS
- dsPIC33E Core
- Code-Efficient (C and Assembly) Architecture
- Two 40-Bit Wide Accumulators
- Single-Cycle (MAC/MPY) with Dual Data Fetch
- Single-Cycle, Mixed-Sign MUL plus Hardware Divide
- 32-Bit Multiply Support
- Provides a boot Flash segment in addition to the existing general Flash segment
- Error Code Correction (ECC) for Flash
- Added Two Alternate Register Sets for Fast Context Switching
- Up to Six Pulse-Width Modulation (PWM) Outputs (three generators)
- High-Speed PWM
- Primary Master Time Base Inputs allow Time Base Synchronization from Internal/External Sources
- Dead Time for Rising and Falling Edges
- 8.3 ns PWM Resolution at 60 MIPS,
- 16.6 ns Center-Aligned mode at 60 MIPS
- PWM support DC/DC, AC/DC, inverters, Power Factor Correction (PFC) and lighting
- PWM support Brushless Direct Current (BLDC), Permanent Magnet Synchronous Motor (PMSM), AC Induction Motor (ACIM), Switched Reluctance Motor (SRM)
- Programmable Fault inputs
- Flexible trigger configurations for Analog-to-Digital conversion
- Independent Time Base
- Supports PWM lock, PWM output chopping and dynamic phase shifting
- Integrated Analog Features
- ADC configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H
- Up to 36 analog inputs
- Flexible and Independent ADC Trigger Sources
- Up to Four Op Amp/Comparators with Direct Connection to the ADC module:
- Additional dedicated comparator and 7-bit Digital-to-Analog Converter (DAC)
- Programmable references with 128 voltage points
- Programmable blanking and filtering
- Charge Time Measurement Unit
- Supports mTouch™ capacitive touch sensing
- Provides high-resolution time measurement (1 ns)
- On-chip temperature measurement
- Temperature sensor diode
- Multiple sources of edge input triggers
- Timers/Output Compare/Input Capture
- Up to nine general purpose timers
- Five 16-bit or up to two 32-bit timers/counters, Timer3 can provide ADC trigger
- Oscillator Frequency Monitoring through CTMU
- Four Output Capture modules configurable as timers/counters
- Four Input Capture modules
- Communication Interfaces
- CAN module with 32 buffers, 16 filters and three masks
- Support for LIN/J2602 bus support and IrDA®
- High and low speed (SCI)
- 25 Mbps data rate without PPS used
- One I2C™ module (up to 1 Mbaud) with SMBus Support
- Two SENT J2716 (Single Edge Nibble Transmission-Transmit/Receive) module for Automotive Applications
- Direct Memory Access (DMA)
- 4-Channel DMA with User-Selectable Priority Arbitration
- Universal Asynchronous Receiver/Transmitter (UART), Serial Peripheral Interface (SPI), ADC, Input Capture, Output Compare
- Qualification and Class B Support
- AEC-Q100 Grade 1 (-40ºC to +125ºC)
- AEC-Q100 Grade 0 (-40ºC to +150ºC)
- Class B Safety Library, IEC 60730
- Functional Safety support (ISO26262)
- ASIL-B focused applications
- FMEDA and Safety manual
- XC16 Functional Safety Compiler
- Functional Safety hardware features
- Flash with Error Correction Code (ECC)
- CodeGuard™ Memory Protection
- On-chip Regulator for CPU
- Backup FRC and redundant clock sources
- Fail Safe Clock Monitor
- Windowed Watchdog Timer (WDT)
- Windowed Deadman Timer (DMT)
- Oscillator Frequency Monitoring through CTMU (OSCI, SYSCLK, FRC, BFRC, LPRC)
- BOR and POR
- Cyclical Redundancy Check (CRC)
- Analog peripherals redundancies
- Illegal Opcode Detection
- PWM Lock and Dedicated PWM Fault Pin
- Internal Loopback to test communication peripherals and IO ports
- SFR and Configuration Locks
- Math Error Trap
- Address Trap
- Redundant data storage for Flash-based Configuration bits and Peripheral Pin Select (PPS) Configuration bits
Specifications
Product Category | Embedded - Microcontrollers | Series | Automotive, AEC-Q100, dsPIC 33EV |
Packaging | Tray | Operating-Temperature | -40°C ~ 125°C (TA) |
Number-of-I-O | 35 | Speed | 60 MIPs |
EEPROM-Size | - | Core-Processor | dsPIC |
RAM-Size | 4K x 8 | Program-Memory-Type | FLASH |
Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT | Connectivity | CAN, I2C, IrDA, LIN, SPI, UART/USART |
Voltage-Supply-Vcc-Vdd | 4.5 V ~ 5.5 V | Core-Size | 16-Bit |
Program-Memory-Size | 32KB (11K x 24) | Data-Converters | A/D 24x10/12b |
Oscillator-Type | Internal | Tags | dsPIC33EV32GM104-E, dsPIC33EV32GM104, dsPIC33EV32GM1, dsPIC33EV3, dsPIC33EV, dsPIC33E, dsPIC33, dsPIC3, dsPIC, dsPI, DSP |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 5242 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $4.351 | $4.35 |
200+ | $1.683 | $336.60 |
500+ | $1.625 | $812.50 |
1000+ | $1.594 | $1,594.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for DSPIC33EV32GM104-E/PT, guaranteed quotes back within 12hr.