Payment Method
FUSB302BUCX
USB Controller USB 3.1 USB Interface 9-WLCSP (1.21x1.26)
-
Manufacturer:
-
Mfr.Part #:
FUSB302BUCX
-
Datasheet:
-
Case Outline:
510BR
-
MSL Temp (°C):
260
-
Container Type:
REEL
-
Series:
FUSB302B
-
EDA/CAD Models:
Availability: 3595 PCS
Please fill in the short form below and we will provide you the quotation immediately.
FUSB302BUCX General Description
The FUSB302B targets system designers looking to implement a DRP/SRC/SNK USB Type-C connector with low amount of programmability.
The FUSB302B enables the USB Type-C detection including attach, and orientation. The FUSB302B integrates the physical layer of the USB BMC Power Delivery protocol to allow up to 100 W of power and role swap. The BMC PD block enables full support for alternative interfaces of the Type-C specification.
Reference code is available for the FUSB302B for easy implementation of Type-C and USB BMC Power Delivery protocol across several embedded controller platforms. Click on the Software link below.
Key Features
- Dual-Role Functionality with Autonomous DRP Toggle
- Ability to connect as either a host or a device based on what has been attached.
- Software configurable either as a dedicated host, dedicated device, or dual role.
- Dedicated devices can operate both on a Type-C receptacle or a Type-C plug with a fixed CC and VCONN channel.
- Full Type-C 1.2 Support. Integrates the following functionality of the CC pin
- Attach/Detach Detection as Host
- Current Capability Indication as Host
- Current Capability Detection as Device
- Audio Adapter Accessory Mode
- Debug Accessory Mode
- Active Cable Detection
- Integrates CCx to VCONN switch with over-current limiting for powering USB3.1 Full Featured cables.
- USB Power Delivery (PD) 2.0, Version 1.1 Support
- Automatic GoodCRC Packet Response
- Automatic soft reset packet sent with retries if needed
- Automatic retries of sending a packet if a GoodCRC is not received
- Dead Battery Support (SNK Mode Support when No Power Applied)
- Automatic Hard Reset Ordered Set Sent
- Low Power Operation: ICC = 25 µA (Typical)
Application
- This product is general usage and suitable for many different applications.
Specifications
Status | Active | Case Outline | 510BR |
MSL Temp (°C) | 260 | Container Type | REEL |
Product Category | USB Interface IC | Series | FUSB302B |
Product | USB Controllers | Type | PD Controller |
Mounting Style | SMD/SMT | Standard | USB-C 1.0 |
Speed | Full Speed (FS) | Data Rate | 5 Gb/s |
Supply Voltage - Min | 2.7 V | Supply Voltage - Max | 5.5 V |
Operating Supply Current | 25 uA | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Core | None |
Interface Type | I2C, USB | Operating Supply Voltage | 3.3 V |
Product Type | USB Interface IC | Factory Pack Quantity | 3000 |
Subcategory | Interface ICs | Unit Weight | 0.001317 oz |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
FUSB302BUCX Datasheet PDF
FUSB302BUCX PDF Preview
Availability: 3595 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $0.515 | $0.52 |
10+ | $0.452 | $4.52 |
30+ | $0.420 | $12.60 |
100+ | $0.389 | $38.90 |
500+ | $0.370 | $185.00 |
1000+ | $0.361 | $361.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for FUSB302BUCX, guaranteed quotes back within 12hr.
works fine, fast shipment