This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

HSCMRNN1.6BASA3 +BOM

Sensor; Pressure; absolute; 0 bar to 1.6 bar; 3.3 Vdc; dry gases only | Honeywell HSCMRNN1.6BASA3

Manufacturer:

Honeywell
Mfr.Part #:

HSCMRNN1.6BASA3
Datasheet:

HSCMRNN1.6BASA3 Datasheet (PDF)
Pressure Type:

Absolute
Operating Pressure:

0 bar to 1.6 bar
Accuracy:

1 %
Output Type:

Digital
EDA/CAD Models:

Request Free CAD Models for HSCMRNN1.6BASA3

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

HSCMRNN1.6BASA3 General Description

TruStability™ HSC Series-High Accuracy, digital SPI, SMT RN: single radial barbed port, absolute, 0 bar to 1.6 bar, 3.3 Vdc, dry gases only, no special options The TruStability™ High Accuracy Silicon Ceramic (HSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital. The HSC Series is calibrated over the temperature range of 0°C to 50°C [32°F to 122°F]. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc. These sensors measure absolute, gage, or differential pressures. The absolute versions have an internal vacuum reference and an output value proportional to absolute pressure. Gage versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere. Differential versions allow measurement of pressure between the two pressure ports. The TruStability™ pressure sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases. Available options extend the performance of these sensors to non-corrosive, non-ionic liquids for pressure ranges above 40 mbar | 4 kPa | 20 inH2O. All products are designed and manufactured according to ISO 9001 standards.

Key Features

Port Diameter = 1.93 MM

Specifications

Product Category	Board Mount Pressure Sensors	Pressure Type	Absolute
Operating Pressure	0 bar to 1.6 bar	Accuracy	1 %
Output Type	Digital	Mounting Style	SMD/SMT
Interface Type	SPI	Operating Supply Voltage	3.3 V
Port Type	Single Radial Barbed	Resolution	12 bit
Minimum Operating Temperature	0 C	Maximum Operating Temperature	+ 50 C
Series	HSC	Tradename	TruStability
Operating Supply Current	3.1 mA	Port Size	1.93 mm
Product Type	Pressure Sensors	Factory Pack Quantity	50
Subcategory	Sensors	Supply Voltage - Max	3.6 V
Supply Voltage - Min	3 V	Unit Weight	0.035274 oz