Payment Method
ISO1042DWR +BOM
Isolated CAN transceiver with 70-V bus fault protection & flexible data rate
SOIC-16-
Manufacturer:
-
Mfr.Part #:
ISO1042DWR
-
Datasheet:
-
Rating:
Catalog
-
Isolation rating:
Basic, Reinforced
-
Data rate (max) (MBps):
5
-
Working isolation voltage (VIOWM) (Vrms):
1060
-
EDA/CAD Models:
Availability: 7001 PCS
Please fill in the short form below and we will provide you the quotation immediately.
ISO1042DWR General Description
The ISO1042 device is a galvanically-isolated controller area network (CAN) transceiver that meets the specifications of the ISO11898-2 (2016) standard. The ISO1042 device offers ±70-V DC bus fault protection and ±30-V common-mode voltage range. The device supports up to 5-Mbps data rate in CAN FD mode allowing much faster transfer of payload compared to classic CAN. This device uses a silicon dioxide (SiO2) insulation barrier with a withstand voltage of 5000 VRMS and a working voltage of 1060 VRMS. Electromagnetic compatibility has been significantly enhanced to enable system-level ESD, EFT, surge, and emissions compliance. Used in conjunction with isolated power supplies, the device protects against high voltage, and prevents noise currents from the bus from entering the local ground. The ISO1042 device is available for both basic and reinforced isolation (see Reinforced and Basic Isolation Options). The ISO1042 device supports a wide ambient temperature range of –40°C to +125°C. The device is available in the SOIC-16 (DW) package and a smaller SOIC-8 (DWV) package.
Key Features
- Meets the ISO 11898-2:2016 physical layer standard
- Supports classic CAN up to 1 Mbps and FD (Flexible Data Rate) up to 5 Mbps
- Low loop delay: 152 ns
- Protection features
- DC bus fault protection voltage: ±70 V
- HBM ESD tolerance on bus pins: ±16 kV
- Driver Dominant Time Out (TXD DTO)
- Undervoltage protection on VCC1 and VCC2
- Common-Mode Voltage Range: ±30 V
- Ideal passive, high impedance bus terminals when unpowered
- High CMTI: 100 kV/µs
- VCC1 voltage range: 1.71 V to 5.5 V
- Supports 1.8-V, 2.5-V, 3.3-V and 5.0-V logic interface to the CAN controller
- VCC2 Voltage Range: 4.5 V to 5.5 V
- Robust Electromagnetic Compatibility (EMC)
- System-level ESD, EFT, and surge immunity
- Low emissions
- Ambient Temperature Range: –40°C to +125°C
- 16-SOIC and 8-SOIC package options
- Automotive version available: ISO1042-Q1
- Safety-related certifications:
- 7071-VPK VIOTM and 1500-VPK VIORM (Reinforced and Basic Options) per DIN VDE V 0884-11:2017-01
- 5000-VRMS Isolation for 1 Minute per UL 1577
- IEC 60950-1, IEC 60601-1 and EN 61010-1 certifications
- CQC, TUV and CSA certifications
Specifications
Rating | Catalog | Isolation rating | Basic, Reinforced |
Data rate (max) (MBps) | 5 | Working isolation voltage (VIOWM) (Vrms) | 1060 |
Surge isolation voltage (VIOSM) (VPK) | 6000, 10000 | Transient isolation voltage (VIOTM) (VPK) | 7071 |
Withstand isolation voltage (VISO) (Vrms) | 5000 | CMTI (min) (kV/µs) | 85 |
Supply voltage (V) | 1.71 to 5.5, 4.5 to 5.5 | Bus fault voltage (V) | -70 to 70 |
Common-mode voltage (V) | -30 to 30 | ESD HBM (kV) | 16 |
Creepage (min) (mm) | 8, 8.5 | Clearance (min) (mm) | 8, 8.5 |
Operating temperature range (°C) | -40 to 125 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 7,001
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $2.555 | $2.56 |
10+ | $2.206 | $22.06 |
30+ | $1.987 | $59.61 |
100+ | $1.764 | $176.40 |
500+ | $1.662 | $831.00 |
1000+ | $1.619 | $1,619.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for ISO1042DWR, guaranteed quotes back within 12hr.