Payment Method
MAX3232EIPWRQ1
Automotive 3- to 5.5-V 250kbps RS-232 line driver/receiver with +/-15-kV IEC-ESD protection
-
Manufacturer: Texas Instruments, Inc
-
Mfr.Part #: MAX3232EIPWRQ1
-
Datasheet: MAX3232EIPWRQ1 Datasheet (PDF)
-
Package/Case: TSSOP16
-
Product Type: Drivers
-
RoHS:
-
Lifecycle: Active
-
EDA/CAD Models: Request Free CAD Models for MAX3232EIPWRQ1
Availability: 4392 PCS
Please fill in the short form below and we will provide you the quotation immediately.
MAX3232EIPWRQ1 General Description
The MAX3232E device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The device operates at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.
Key Features
- Qualified for Automotive Applications
- Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards
- Operates With 3-V to 5.5-V VCC Supply
- Operates up to 250 kbit/s
- Two Drivers and Two Receivers
- Low Standby Current . . .300 µA Typical
- External Capacitors . . . 4 × 0.1 µF
- Accepts 5-V Logic Input With 3.3-V Supply
- Pin Compatible to Alternative High-Speed Pin-Compatible Device (1 Mbit/s): SNx5C3232
Specifications
Category | Integrated Circuits (ICs)InterfaceDrivers, Receivers, Transceivers | Mfr | Texas Instruments |
Series | Automotive, AEC-Q100 | Package | Tape & Reel (TR)Cut Tape (CT)Digi-Reel® |
Product Status | Active | Type | Transceiver |
Protocol | RS232 | Number of Drivers/Receivers | 2/2 |
Duplex | Full | Receiver Hysteresis | 300 mV |
Data Rate | 250kbps | Voltage - Supply | 3V ~ 5.5V |
Operating Temperature | -40°C ~ 85°C | Mounting Type | Surface Mount |
Package / Case | 16-TSSOP (0.173", 4.40mm Width) | Supplier Device Package | 16-TSSOP |
Base Product Number | MAX3232 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 4392 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for MAX3232EIPWRQ1, guaranteed quotes back within 12hr.
Top Sellers
-
SN65HVD230DR
TI
1000+ $0.403
-
SN75176BP
TI
1000+ $0.309
-
PCF8574AN
TI
8-bit 2.5- to 5.5-V I2C/SMBus I/O expander with interrupt
-
MAX232N
Texas Instruments, Inc
2/2 Transceiver Full RS232 16-PDIP
-
TCA6424RGJR
Texas Instruments, Inc
24-bit translating 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, reset & config registers
Product shol very long but finally the seller extended the protection time recommend