Payment Method
MAX4282EUA+
General Purpose Amplifier 2 Circuit Rail-to-Rail 8-uMAX/uSOP
-
Manufacturer:
Analog Devices Inc./Maxim Integrated
-
Mfr.Part #:
MAX4282EUA+
-
Datasheet:
-
Series:
GainAmp™
-
Amplifier Type:
General Purpose
-
Number of Circuits:
2
-
Output Type:
Rail-to-Rail
-
EDA/CAD Models:
Availability: 9178 PCS
Please fill in the short form below and we will provide you the quotation immediately.
MAX4282EUA+ General Description
The MAX4174/MAX4175/MAX4274/MAX4275 GainAmp family combines a low-cost rail-to-rail op amp with precision internal gain-setting resistors and VCC/2 biasing. Factory-trimmed on-chip resistors decrease design size, cost, and layout, and provide 0.1% gain accuracy. Fixed inverting gains from -0.25V/V to -100V/V or noninverting gains from +1.25V/V to +101V/V are available. These devices operate from a single +2.5V to +5.5V supply and consume only 300µA. GainAmp amplifiers are optimally compensated for each gain version, achieving exceptional GBW products up to 23MHz (AV = +25V/V to +101V/V). High-voltage fault protection withstands µ17V at either input without excessive current draw.
Key Features
- GainAmp Family Provides Internal Precision Gain-Setting Resistors in SOT23 (MAX4174/5)
- 0.1% Gain Accuracy (RF/RG) (MAX4174/5, MAX4274/5)
- 54 Standard Gains Available (MAX4174/5, MAX4274/5)
- Open-Loop Unity-Gain-Stable Op Amps (MAX4281/2/4)
- Rail-to-Rail Outputs Drive 1kΩ Load
- Internal VCC/2 Biasing (MAX4175/MAX4275)
- +2.5V to +5.5V Single Supply
- 300µA Supply Current
- Up to 23MHz GBW Product
- Fault-Protected Inputs Withstand ±17V
- Stable with Capacitive Loads Up to 470pF with No Isolation Resistor
Application
- Cellular Handsets
- Digital Cameras (DIGICAMs)
- Glucose Meters
- GPS Solutions
- Infrared Receivers for Remote Controls
- Instruments, Terminals, and Bar-Code Readers
- IP Camera
- Keyless Entry
- Low-Side Current-Sense Amplifiers
- MP3 and Portable Media Players
- Photodiode Preamps
- Portable Instruments
- Smart-Card Readers
Specifications
Series | GainAmp™ | Amplifier Type | General Purpose |
Number of Circuits | 2 | Output Type | Rail-to-Rail |
Slew Rate | 0.7V/µs | Gain Bandwidth Product | 2 MHz |
Current - Input Bias | 50 pA | Voltage - Input Offset | 500 µV |
Current - Supply | 320µA (x2 Channels) | Current - Output / Channel | 65 mA |
Voltage - Supply Span (Min) | 2.5 V | Voltage - Supply Span (Max) | 5.5 V |
Operating Temperature | -40°C ~ 85°C | Mounting Type | Surface Mount |
Base Product Number | MAX4282 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 9178 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $3.317 | $3.32 |
200+ | $1.285 | $257.00 |
500+ | $1.239 | $619.50 |
1000+ | $1.217 | $1,217.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for MAX4282EUA+, guaranteed quotes back within 12hr.