This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

MAX5922CEUI

Power Over Ethernet PSE Controller 32V 60V 28-Pin TSSOP

MAX5922CEUI General Description

The MAX5922A/B/C is a single-port network power controller with an integrated power MOSFET, operating from a +32V to +60V supply rail. The device is specifically designed for power-sourcing equipment (PSE) in power-over-LAN applications and is fully compliant to the IEEE 802.3af standard. The MAX5922 provides power devices (PD) discovery, classification, current limit, and other necessary functions for an IEEE 802.3af compliant PSE. The MAX5922 is suitable for PSE function in both switch/router systems where the power is delivered to the load through the signal pairs, and in midspan systems where the power is delivered to the load through the spare pairs. In midspan mode, a detection collision avoidance circuit (MAX5922A/C only) provides the necessary back-off timing to prevent fault detections that happen when two different PSEs try to detect and power the same PD. The MAX5922B/C have a detection disable input that can be connected high to disable the detection/classification functions or connected low to enable them. The MAX5922 features a programmable undervoltage lockout (UVLO) that keeps the device in shutdown until the input voltage exceeds a certain threshold, set to 38V (MAX5922A) or 28V (MAX5922B/C) internally. After successfully discovering and classifying a PD, the MAX5922 enters startup mode. During startup, the MAX5922 limits the output voltage and current slew rate to minimize EMI (electromagnetic interference). The MAX5922 has an integrated 0.45Ω N-channel power MOSFET that provides efficient operation and simplified system design. The MAX5922 monitors and provides current-limit protection to the load at all times. The current limit is programmable using an external current-sensing resistor. The MAX5922 features current-limit foldback and duty-cycle limit to ensure robust operation during load-fault and short-circuit conditions. Fault management allows the part to either latch-off or autorestart after a fault. The MAX5922 provides POK, active-low ZC, and active-low FAULT status signals to indicate output power is good, zero-current fault, and other faults (overcurrent, overtemperature), respectively. The MAX5922 is available in a 28-pin TSSOP package and is rated over the extended -40°C to +85°C temperature range.

Analog Devices, Inc Inventory

Key Features

  • IEEE 802.3af Compliant
  • 0.45Ω Integrated Power Switch
  • Power Device (PD) Detection and Classification
  • 100μA PD Leakage Detection Tolerant
  • Programmable Current Limit
  • Zero-Current Detection with Status Output
  • Detection Collision Avoidance Option for Midspan Application
  • Input Logic Signals Compatible with 1.8V to 5V CMOS Logic
  • Separate Analog and Digital Grounds with Up to ±4V Offset
  • Power-Good Status Output
  • Overcurrent and Overtemperature Protection with Status Outputs
  • Current-Limit Foldback with Timeout and Duty-Cycle Control
  • Latch or Autorestart Fault Management
Analog Devices, Inc Original Stock

Application

  • Computer Telephony
  • Midspan Power Injectors
  • Power-Over-LAN/Power-Over-MDI (Media-Dependent Interface)
  • Power-Sourcing Equipment (PSE)
  • Single-Port Power Injector/Adapter
  • Switches/Routers with In-Line Power
Analog Devices, Inc Inventory

Specifications

Category Integrated Circuits (ICs)Power Management (PMIC)Power Over Ethernet (PoE) Controllers Series -
Type Controller (PSE) Number of Channels 1
Power - Max 15.4 W Internal Switch(s) Yes
Auxiliary Sense No Standards 802.3af (PoE)
Voltage - Supply 32V ~ 60V Current - Supply 1mA
Operating Temperature -40°C ~ 85°C Mounting Type Surface Mount
Base Product Number MAX5922
MAX5922: Typical Application Circuit

Service Policies and Others

After-Sales & Settlement Related

payment Payment

Payment Method

hsbc
TT/Wire Transfer
paypal
Paypal
wu
Western Union
mg
Money Gram

For alternative payment channels, please reach out to us at:

[email protected]
shipping Shipping & Packing

Shipping Method

fedex
Fedex
ups
UPS
dhl
DHL
tnt
NTN
Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty Warranty

We promise to provide 365 days quality assurance service for all our products.

Reviews

You need to log in to reply. Sign In | Sign Up

Availability: 4231 PCS

+BOM
Qty. Unit Price Ext. Price
1+ - -

The prices below are for reference only.