This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

MB90F598GPFR-GE1 +BOM

16-bit Microcontrollers - MCU INTEGRATED CIRCUIT

Manufacturer:

FME
Mfr.Part #:

MB90F598GPFR-GE1
Datasheet:

MB90F598GPFR-GE1 Datasheet (PDF)
Description:

16-bit Microcontrollers - MCU INTEGRATED CIRCUIT
Availability:

Not Available
Packaging:

Tray
Series:

F²MC-16LX MB90595G

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

MB90F598GPFR-GE1 General Description

F²MC-16LX F²MC-16LX MB90595G Microcontroller IC 16-Bit 16MHz 128KB (128K x 8) FLASH 100-QFP (14x20)

Key Features

Clock
Embedded PLL clock multiplication circuit
Operating clock (PLL clock) can be selected from divided-by-2 of oscillation or one to four times the oscillation (at oscillation of 4 MHz, 4 MHz to 16 MHz).
Minimum instruction execution time: 62.5 ns (operation at oscillation of 4 MHz, four times the oscillation clock, VCC of 5.0 V)
Instruction set to optimize controller applications
Rich data types (bit, byte, word, long word)
Rich addressing mode (23 types)
Enhanced signed multiplication/division instruction and RETI instruction functions
Enhanced precision calculation realized by the 32-bit accumulator
Instruction set designed for high level language (C language) and multi-task operations
Adoption of system stack pointer
Enhanced pointer indirect instructions
Barrel shift instructions
Program patch function (for two address pointers)
Enhanced execution speed: 4-byte instruction queue
Enhanced interrupt function: 8 levels, 34 factors
Automatic data transmission function independent of CPU operation
Extended intelligent I/O service function (EI2OS): Up to 10 channels
Embedded ROM size and types
Mask ROM: 128 Kbytes
Flash ROM: 128 Kbytes
Embedded RAM size: 4 Kbytes (MB90595G: 6 Kbytes)
Flash ROM
Supports automatic programming, Embedded Algorithm
Write/Erase/Erase-Suspend/Resume commands
A flag indicating completion of the algorithm
Hard-wired reset vector available in order to point to a fixed boot sector
Erase can be performed on each block
Block protection with external programming voltage
Low-power consumption (stand-by) mode
Sleep mode (mode in which CPU operating clock is stopped)
Stop mode (mode in which oscillation is stopped)
CPU intermittent operation mode
Hardware stand-by mode
Process: 0.5 µm CMOS technology
I/O port
General-purpose I/O ports: 78 ports
Push-pull output and Schmitt trigger input.
Programmable on each bit as I/O or signal for peripherals.
Timer
Watchdog timer: 1 channel
8/16-bit PPG timer: 8/16-bit × 6 channels
16-bit re-load timer: 2 channels
16-bit I/O timer
16-bit Free-run timer: 1 channel
Input capture: 4 channels
Output compare: 4 channels
Extended I/O serial interface: 1 channel
UART0
With full-duplex double buffer (8-bit length)
Clock asynchronized or clock synchronized (with start/stop bit) transmission can be selectively used.
UART1 (SCI)
With full-duplex double buffer (8-bit length)
Clock asynchronized or clock synchronized serial transmission (I/O extended transmission) can be selectively used.
Stepping motor controller (4 channels)
External interrupt circuit (8 channels)
A module for starting an extended intelligent I/O service (EI2OS) and generating an external interrupt which is triggered by an external input.
Delayed interrupt generation module: Generates an interrupt request for switching tasks.
8/10-bit A/D converter (8 channels)
8/10-bit resolution can be selectively used.
Starting by an external trigger input.
FULL-CAN interface: 1 channel
Conforming to Version 2.0 Part A and Part B
Flexible message buffering (mailbox and FIFO buffering can be mixed)
18-bit Time-base counter
External bus interface: Maximum address space 16 Mbytes

Specifications

Description	16-bit Microcontrollers - MCU INTEGRATED CIRCUIT	Availability	Not Available
Packaging	Tray	Series	F²MC-16LX MB90595G
Programmabe	Not Verified	Core Processor	F²MC-16LX
Core Size	16-Bit	Speed	16MHz
Connectivity	CANbus, EBI/EMI, SCI, Serial I/O, UART/USART	Peripherals	POR, PWM, WDT
Number of I/O	78	Program Memory Size	128KB (128K x 8)
Program Memory Type	FLASH	RAM Size	4K x 8
Voltage - Supply (Vcc/Vdd)	3V ~ 5.5V	Data Converters	A/D 8x8/10b
Oscillator Type	External	Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount	Base Product Number	CY90F598