This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

MIC2075-2YM-TR

Single USB High-Side 500mA Current Limiting Power Switch.

Manufacturer:

Microchip Technology, Inc
Mfr.Part #:

MIC2075-2YM-TR
Datasheet:

MIC2075-2YM-TR Datasheet (PDF)
Series:

MM8™
Switch Type:

General Purpose
Number of Outputs:

1
Ratio - InputOutput:

1:1
EDA/CAD Models:

Request Free CAD Models for MIC2075-2YM-TR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

MIC2075-2YM-TR General Description

The MIC2025 and MIC2075 are high-side MOSFET switches optimized for general-purpose power distribution requiring circuit protection.The MIC2025/75 are internally current limited and have thermal shutdown that protects the device and load. The MIC2075 offers "smart" thermal shutdown that reduces current consumption in fault modes. When a thermal shutdown fault occurs, the output is latched off until the faulty load is removed. Removing the load or toggling the enable input will reset the device output.Both devices employ soft-start circuitry that minimizes inrush current in applications where highly capacitive loads are employed. A fault status output flag is provided that is asserted during overcurrent and thermal shutdown conditions.The MIC2025/75 is available in the MM8® 8-lead MSOP and 8-lead SOP.

Key Features

140mO maximum on-resistance
2.7V to 5.5V operating range
500mA minimum continuous output current
Short-circuit protection with thermal shutdown
Fault status flag with 3ms filter eliminates false assertions
Undervoltage lockout
Reverse current flow blocking (no "body diode")
Circuit breaker mode (MIC2075) reduces power consumption
Logic-compatible input
Soft-start circuit
Low quiescent current
Pin-compatible with MIC2525
UL recognized and EN/IEC 60950-1 (CB) Certified

Microchip Technology, Inc Original Stock

Specifications

Category	Integrated Circuits (ICs)Power Management (PMIC)Power Distribution Switches, Load Drivers	Series	MM8™
Switch Type	General Purpose	Number of Outputs	1
Ratio - Input:Output	1:1	Output Configuration	High Side
Output Type	N-Channel	Interface	On/Off
Voltage - Load	2.7V ~ 5.5V	Voltage - Supply (Vcc/Vdd)	Not Required
Current - Output (Max)	500mA	Rds On (Typ)	90mOhm
Input Type	Non-Inverting	Features	Slew Rate Controlled, Status Flag
Fault Protection	Current Limiting (Fixed), Over Temperature, UVLO	Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount	Base Product Number	MIC2075