This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

OPA4170AID

Quad, 36-V, 1.2-MHz, low-power operational amplifier

Manufacturer:

TEXAS INSTRUMENTS INC
Mfr.Part #:

OPA4170AID
Datasheet:

OPA4170AID Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Pin Count:

14
Reach Compliance Code:

compliant
EDA/CAD Models:

Request Free CAD Models for OPA4170AID

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

OPA4170AID General Description

The OPA170, OPA2170, and OPA4170 devices (OPAx170) are a family of 36-V, single-supply, low-noise operational amplifiers (op amps) that feature micro packages with the ability to operate on supplies ranging from 2.7 V (±1.35 V) to 36 V (±18 V). They offer good offset, drift, and bandwidth with low quiescent current. The single, dual, and quad versions all have identical specifications for maximum design flexibility.

Unlike most op amps, which are specified at only one supply voltage, the OPAx170 family of op amps is specified from 2.7 V to 36 V. Input signals beyond the supply rails do not cause phase reversal. The OPAx170 family is stable with capacitive loads up to 300 pF. The input can operate 100 mV below the negative rail and within 2 V of the positive rail for normal operation. Note that these devices can operate with full rail-to-rail input 100 mV beyond the positive rail, but with reduced performance within 2 V of the positive rail. The OPAx170 op amps are specified from –40°C to +125°C.

Key Features

Supply Range: 2.7 V to 36 V, ±1.35 V to ±18 V
Low Noise: 19 nV/√Hz
RFI Filtered Inputs
Input Range Includes the Negative Supply
Input Range Operates to Positive Supply
Rail-to-Rail Output
Gain Bandwidth: 1.2 MHz
Low Quiescent Current: 110 µA per Amplifier
High Common-Mode Rejection: 120 dB
Low Bias Current: 15 pA (Maximum)
Industry-Standard Packages and micro Packages Available
Create a Custom Design Using the OPAx170 With the WEBENCH^® Power Designer

Specifications

Source Content uid	OPA4170AID	Pbfree Code	Yes
Part Life Cycle Code	Active	Pin Count	14
Reach Compliance Code	compliant	ECCN Code	EAR99
HTS Code	8542.33.00.01	Amplifier Type	OPERATIONAL AMPLIFIER
Architecture	VOLTAGE-FEEDBACK	Average Bias Current-Max (IIB)	0.0035 µA
Bias Current-Max (IIB) @25C	0.000015 µA	Common-mode Reject Ratio-Min	104 dB
Common-mode Reject Ratio-Nom	120 dB	Frequency Compensation	YES
Input Offset Current-Max (IIO)	0.000015 µA	Input Offset Voltage-Max	2000 µV
JESD-30 Code	R-PDSO-G14	JESD-609 Code	e4
Length	8.65 mm	Low-Bias	YES
Low-Offset	NO	Micropower	YES
Moisture Sensitivity Level	3	Neg Supply Voltage Limit-Max	-20 V
Neg Supply Voltage-Nom (Vsup)	-18 V	Number of Functions	4
Number of Terminals	14	Operating Temperature-Max	125 °C
Operating Temperature-Min	-40 °C	Packing Method	TUBE
Peak Reflow Temperature (Cel)	260	Power	NO
Power Supplies	+-1.35/+-18/2.7/36 V	Programmable Power	NO
Qualification Status	Not Qualified	Seated Height-Max	1.75 mm
Slew Rate-Nom	0.4 V/us	Supply Current-Max	0.58 mA
Supply Voltage Limit-Max	20 V	Supply Voltage-Nom (Vsup)	18 V
Surface Mount	YES	Technology	BIPOLAR
Temperature Grade	AUTOMOTIVE	Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Form	GULL WING	Terminal Pitch	1.27 mm
Terminal Position	DUAL	Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Unity Gain BW-Nom	1200	Voltage Gain-Min	316000
Wideband	NO	Width	3.9 mm