This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

PIC24HJ32GP204-E/PT

16-bit Microcontrollers - MCU 16B MCU 32KB 40 MIPS

Manufacturer:

Microchip
Mfr.Part #:

PIC24HJ32GP204-E/PT
Datasheet:

PIC24HJ32GP204-E/PT Datasheet (PDF)
Series:

PIC24HJ32GP20x
Mounting Style:

SMD/SMT
Core:

PIC24H
Program Memory Size:

32 kB
EDA/CAD Models:

Request Free CAD Models for PIC24HJ32GP204-E/PT

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

PIC24HJ32GP204-E/PT General Description

The PIC24H 16-bit device family employs a powerful 16-bitarchitecture, ideal for applications that rely on high-speed, repetitivecomputations, as well as control. The devices are pin compatible with thedsPIC33F family of devices, and share a very high degree of compatibility withthe dsPIC30F family devices. This allows seamless migration options from/toPIC24F, dsPIC30F and dsPIC33F devices.

Key Features

Up to 40 MIPS operation
3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS

Code-efficient (C and Assembly) architecture
Single-cycle mixed-sign MUL plus hardware divide
16-bit wide data path, 24-bit wide instructions
Linear program memory addressing up to 4M instruction words
Linear data memory addressing up to 64 Kbytes

2% internal oscillator
Programmable PLLs and oscillator clock sources
Fail-Safe Clock Monitor (FSCM)
Independent Watchdog Timer (WDT)
Fast wake-up and start-up

Low-power management modes (Sleep, Idle, Doze)
Integrated Power-on Reset and Brown-out Reset
1.35 mA/MHz dynamic current (typical)
55 μA IPD current (typical)

ADC module: - Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 Ksps with one S&H - Ten analog inputs on 28-pin devices and up to 13 analog inputs on 44-pin devices
Flexible and independent ADC trigger sources

Three 16-bit timers/counters. Can pair up two to make one 32-bit
Two Output Capture modules configurable as timers/counters
Four Input Capture modules
Peripheral Pin Select (PPS) to allow function remap

One UART module (10 Mbps) - With support for LIN 2.0 protocols and IrDA®
One 4-wire SPI module (15 Mbps)
One I2C™ module (up to 1 Mbaud) with SM Bus support
PPS to allow function remap

Sink/Source up to 10 mA (pin specific) for standard VOH/VOL, up to 16 mA (pin specific) for non-standard VOH1
5V-tolerant pins
Selectable open drain, pull-ups, and pull-downs
Up to 5 mA overvoltage clamp current
External interrupts on all I/O pins

In-circuit and in-application programming
Two programs and two complex data breakpoints
IEEE 1149.2-compatible (JTAG) boundary scan
Trace and run-time watch

Specifications

Product Category	16-bit Microcontrollers - MCU	Series	PIC24HJ32GP20x
Mounting Style	SMD/SMT	Core	PIC24H
Program Memory Size	32 kB	Data Bus Width	16 bit
ADC Resolution	10 bit, 12 bit	Maximum Clock Frequency	40 MHz
Number of I/Os	35 I/O	Data RAM Size	2 kB
Supply Voltage - Min	3 V	Supply Voltage - Max	3.6 V
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 125 C
Qualification	AEC-Q100	Data RAM Type	RAM
Height	1 mm	Interface Type	I2C, JTAG, SPI, UART
Length	10 mm	Moisture Sensitive	Yes
Number of ADC Channels	13 Channel	Number of Timers/Counters	3 Timer
Processor Series	PIC24	Product	MCU
Product Type	16-bit Microcontrollers - MCU	Program Memory Type	Flash
Factory Pack Quantity	160	Subcategory	Microcontrollers - MCU
Tradename	PIC	Watchdog Timers	Watchdog Timer
Width	10 mm