This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TL072CP

Operational Amplifier TL072CP with Low-Noise JFET Input

Manufacturer:

Texas Instruments
Mfr.Part #:

TL072CP
Datasheet:

TL072CP Datasheet (PDF)
Number of channels:

2
Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V):

30
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V):

7
Rail-to-rail:

In to V+
EDA/CAD Models:

Request Free CAD Models for TL072CP

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TL072CP General Description

TL072CP is a low noise, JFET input operational amplifier with a high input impedance and low noise. It has two independent, high gain, internally frequency compensated operational amplifiers designed to operate from a single power supply over a wide range of voltages. The TL072CP has a typical input bias current of 30 pA, input offset voltage of 6 mV, and a slew rate of 16 V/µs. It also has a common-mode rejection ratio of 80 dB, which helps reduce interference and noise in the signal.The TL072CP is commonly used in audio applications, instrumentation, and control systems where low noise and high input impedance are important. It comes in an 8-pin DIP package and can operate in temperature ranges from -40°C to 125°C. The device is known for its stable operation, low distortion, and high slew rate, making it a popular choice for various circuit designs that require precision and reliability

Key Features

TL072CP is a low noise, high-speed JFET input dual operational amplifier

It has a wide bandwidth (3MHz), low input bias current (30pA), and low input offset voltage (3mV)

It operates on a wide range of power supply voltages (±3V to ±18V) and is suited for audio, instrumentation, and signal processing applications

Application

The TL072CP is commonly used in audio circuits, instrumentation amplifiers, and active filters

It can also be found in voltage followers, integrators, and summing amplifiers

Additionally, it is applied in music amplifiers, preamplifiers, and low-noise signal processing applications

Specifications

Number of channels	2	Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)	30
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)	7	Rail-to-rail	In to V+
GBW (typ) (MHz)	3	Slew rate (typ) (V/µs)	13
Vos (offset voltage at 25°C) (max) (mV)	6	Iq per channel (typ) (mA)	1.4
Vn at 1 kHz (typ) (nV√Hz)	18	Rating	Catalog
Operating temperature range (°C)	-40 to 85, 0 to 70	Offset drift (typ) (µV/°C)	18
Features	Standard Amps	Input bias current (max) (pA)	200
CMRR (typ) (dB)	100	Iout (typ) (A)	0.01
Architecture	FET	Input common mode headroom (to negative supply) (typ) (V)	3
Input common mode headroom (to positive supply) (typ) (V)	0	Output swing headroom (to negative supply) (typ) (V)	1.5
Output swing headroom (to positive supply) (typ) (V)	-1.5