This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TPS51220RHBR +BOM

D-CAP™ Controller, Notebook Power System Voltage Regulator IC 2 Output 32-VQFN (5x5)

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

TPS51220RHBR
Datasheet:

TPS51220RHBR Datasheet (PDF)
Vin (min) (V):

4.5
Vin (max) (V):

28
Vout (min) (V):

1
Vout (max) (V):

12
EDA/CAD Models:

Request Free CAD Models for TPS51220RHBR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TPS51220RHBR General Description

The TPS51220 is a dual synchronous buck regulator controller with 2 LDOs. It is optimized for 5-V/3.3-V system controller, enabling designers to cost effectively complete 2-cell to 4-cell notebook system power supply. The TPS51220 supports high efficiency, fast transient response and 99% duty cycle operation. It supports supply input voltage ranging from 4.5 V to 28 V, and output voltages from 1 V to 12 V. Two types of control schemes can be chosen depending on the application. Peak current mode supports stability operation with lower ESR capacitor and output accuracy. The D-CAP mode supports fast transient response. The high duty (99%) operation and the wide input/output voltage range supports flexible design for small mobile PCs and a wide variety of other applications. The fixed frequency can be adjusted from 200 kHz to 1 MHz by a resistor, and each channel runs 180° out of phase. The TPS51220 can also synchronize to the external clock, and the interleaving ratio can be adjusted by its duty. The TPS51220 is available in the 32 pin 5x5 QFN package and is specified from -40°C to 85°C.

Key Features

Input Voltage Range: 4.5 V to 28 V
Output Voltage Range: 1 V to 12 V
Selectable Light Load Operation (Continuous / Auto Skip / Out-Of-Audio Skip)
Programmable Droop Compensation
Voltage Servo Adjustable Soft Start
200 kHz to 1 MHz Fixed Frequency PWM
Selectable Current/D-CAP Mode Architecture
180° Phase Shift Between Channels
Resistor or Inductor DCR Current Sensing
Powergood Output for Each Channel
OCL/OVP/UVP/UVLO Protections (OVP Disable Option)
Thermal Shutdown (Non-Latch)
Output Discharge Function (Disable Option)
Integrated Boot Strap MOSFET Switch
QFN-32 (RHB)
APPLICATIONS
- Notebook Computer System and I/O Bus
- Point of Load in LCD TV, MFP

Specifications

Vin (min) (V)	4.5	Vin (max) (V)	28
Vout (min) (V)	1	Vout (max) (V)	12
Iout (max) (A)	20	Iq (typ) (mA)	1.3
Switching frequency (min) (kHz)	200	Switching frequency (max) (kHz)	1000
Features	Enable, Frequency synchronization, Light Load Efficiency, Phase Interleaving, Power good, Synchronous Rectification	Operating temperature range (°C)	-40 to 85
Regulated outputs (#)	2	Number of phases	1
Rating	Catalog	Control mode	D-CAP, current mode
Type	Controller	Pin Count	33
Released Date	Dec 4, 2020	Last Modified Date	Mar 7, 2023 4:10 PM UTC