Transistors
Transistors are semiconductor devices that can amplify or switch electronic signals. Comprising three layers of semiconductor material, they are commonly referred to as emitter, base, and collector. Transistors offer significant advantages, including signal amplification capabilities, acting as efficient switches for current control, and their small size compared to vacuum tubes. Major manufacturers in the field of transistors include Intel, Samsung Electronics, TSMC, and Broadcom, all contributing to the advancement and widespread application of transistor technology in modern electronic devices. Where to buy transistors? Choose Avaq Semiconductor Co., Limited as your cheap, obsolete, new, excess transistors chip supplier, and distributor.
Types of Discrete Semiconductors
P-Channel PowerTrench® MOSFET -150V, -13A, 107mΩ
Power MOSFET, 40V N Channel __A 0.9m Ohm in Dualcool56 package
N-channel power MOSFET with 600V rating and 18A continuous drain current in TO-220 package
TO252-3 package N-Channel MOSFET, capable of handling 250 volts and 25 amperes
Single N-Channel 250 V 48 mOhm 72 nC HEXFET® Power Mosfet - D2PAK
D2PAK packaged N-channel MOSFET rated for 200V and 72A
Product BSC220N20NSFDATMA1 is a N-channel MOSFET with a voltage rating of 200V and a current rating of 52A
Tape and Reel Differentiated MOSFETs
MOSFET MOSFT 100V 97A 9mOhm 83nC Qg
N-channel silicon power MOSFET with a maximum voltage rating of 100V and a current rating of 127A in a D2PAK package
N-channel MOSFET with a 100V voltage rating, capable of handling currents up to 55A, featuring a low on-resistance of 14
OptiMOS Power Mosfet in TDSON-8 package, part of BSC070xx Series, offers high performance with 100V voltage rating and 80A current rating
IRFB4410ZPBF - Trench Technology with Voltage Rating of at Least 100V
![favicon]( "favicon")
FAQ
- What is a Transistor?
- A transistor is a semiconductor device that can amplify or switch electronic signals and electrical power. It acts as a controllable switch or signal amplifier in electronic circuits.
- What are the main types of Transistors?
- Bipolar Junction Transistors (BJTs): These include NPN and PNP types. NPN transistors use two layers of n-type semiconductor material and one layer of p-type material, while PNP transistors use the opposite arrangement. BJTs are commonly used for amplification. Field-Effect Transistors (FETs): These include MOSFETs (Metal-Oxide-Semiconductor FETs) and JFETs (Junction FETs). FETs control current flow using an electric field and are used for amplification, switching, and voltage regulation.
- Can I replace a BJT with an FET or vice versa?
- In some cases, you can replace a BJT with an FET and vice versa, depending on the circuit requirements and configuration. However, differences in operating principles and characteristics may require adjustments in the circuit design.
- How do I choose the right Transistor for my application?
- Consider factors such as the required current and voltage ratings, switching speed, amplification needs, and circuit configuration. Consult datasheets and manufacturer resources for guidance.