Payment Method
5962-9855501VPA +BOM
QML Class V Precision Timer
DIP-
Manufacturer:
-
Mfr.Part #:
5962-9855501VPA
-
Datasheet:
-
Series:
*
-
Function:
General-purpose timer
-
Iq (typ) (mA):
5
-
Rating:
Space
-
EDA/CAD Models:
Send all BOMs to [email protected], or fill out the form below for a quote on 5962-9855501VPA. Guaranteed response within 12hr.
Availability: 6509 PCS
Please fill in the short form below and we will provide you the quotation immediately.
5962-9855501VPA General Description
The SE555 is a precision timing circuit capable of producing accurate time delays or oscillation. In the time-delay or monostable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the astable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor.
The threshold and trigger levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset, and the output goes low. When the output is low, a low-impedance path is provided between discharge (DISCH) and ground.
The output circuit is capable of sinking or sourcing current up to 100 mA. Operation is specified for supplies of 4.5 V to 16.5 V. With a 5-V supply, output levels are compatible with TTL inputs.
Key Features
- Timing From Microseconds to Hours
- Astable or Monostable Operation
- Adjustable Duty Cycle
- TTL-Compatible Output Can Sink or Source up to 100 mA
- QML-V Qualified, SMD 5962-98555
- Military Temperature Range (–55°C to 125°C)
- Rad-Tolerant: 25 kRad (Si) TID(1)
(1) Radiation tolerance is a typical value based upon initial device qualification with dose rate = 10 mrad/sec. Radiation Lot Acceptance Testing is available - contact factory for details.
Specifications
Category | Integrated Circuits (ICs)Clock/TimingProgrammable Timers and Oscillators | Series | * |
Function | General-purpose timer | Iq (typ) (mA) | 5 |
Rating | Space | Operating temperature range (°C) | -55 to 125 |
Supply voltage (max) (V) | 16.5 | Supply voltage (min) (V) | 4.5 |
feature-maximum-operating-supply-voltage-v | 16.5 | feature-minimum-operating-supply-voltage-v | 4.5 |
feature-packaging | Tube | feature-rad-hard | No |
feature-pin-count | 8 | feature-cecc-qualified | No |
feature-esd-protection | feature-escc-qualified | No | |
feature-military | Yes | feature-aec-qualified | No |
feature-aec-qualified-number | feature-auto-motive | No | |
feature-p-pap | No | feature-eccn-code | EAR99 |
feature-svhc | feature-svhc-exceeds-threshold | No |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 6,509
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.