Payment Method
AM79C970 +BOM
PCnetTM-PCISingle-ChipEthernetControllerforPCILocalBus
QFP-
Manufacturer:
-
Mfr.Part #:
AM79C970
-
Datasheet:
-
Package/Case:
QFP
-
EDA/CAD Models:
Send all BOMs to [email protected], or fill out the form below for a quote on AM79C970. Guaranteed response within 12hr.
Availability: 7072 PCS
Please fill in the short form below and we will provide you the quotation immediately.
AM79C970 General Description
GENERAL DESCRIPTIONThe PCnet-PCI single-chip 32-bit Ethernet controller is a highly integrated Ethernet system solution designed to address high-performance system application requirements. It is a flexible bus-mastering device that can be used in any application, including network-ready PCs, printers, fax modems, and bridge/router designs.DISTINCTIVE CHARACTERISTICS■Single-chip Ethernet controller for the Periph eral Component Interconnect (PCI) local bus■Supports ISO 8802-3 (IEEE/ANSI 802.3) and Ethernet Standards■Direct interface to the PCI local bus■Compliant to PCI local bus specification(Revision 2.0)■Software compatible with AMD’s Am7990 LANCE, Am79C90 C-LANCE, Am79C960 PCnet-ISA, Am79C961 PCnet-ISA+, Am79C965 PCnet-32, and Am79C900 ILACCTM register and descriptor architecture■Compatible with Am2100/Am1500T and Novell NE2100/NE1500 driver software■High-performance Bus Master architecture with integrated DMA Buffer Management Unit for low CPU and bus utilization■Big endian byte alignment supported■Single +5 V power supply operation■Low-power, CMOS design with sleep modes allows reduced power consumption for critical battery powered applications and Green PCs■MicrowireTM EEPROM interface supports jumperless design■Individual 136-byte transmit and 128-byte receive FIFOs provide frame buffering for increased system latency, and support the following features:— Automatic retransmission with no FIFO reload— Automatic receive stripping and transmit padding (individually programmable)— Automatic runt packet rejection— Automatic deletion of received collision frames■Look-Ahead Packet Processing (LAPP) concept allows protocol analysis to begin before end of receive frame■Integrated Manchester Encoder/Decoder■Provides integrated Attachment Unit Interface (AUI) and 10BASE-T transceiver with automatic port selection■Automatic Twisted-Pair receive polarity detection and automatic correction of the receive polarity■Optional byte padding to long-word boundary on receive■Dynamic transmit FCS generation programmable on a frame-by-frame basis■Internal/external loopback capabilities■Supports the following types of network interfaces:— AUI to external 10BASE2, 10BASE5,10BASE-T or 10BASE-F MAU— Internal 10BASE-T transceiver with Smart Squelch to Twisted-Pair medium■NAND Tree test mode for connectivity testing on printed circuit boards■132-pin PQFP package
Key Features
- Single-chip Ethernet controller for the Periph eral Component Interconnect (PCI) local bus
- Supports ISO 8802-3 (IEEE/ANSI 802.3) and Ethernet Standards
- Direct interface to the PCI local bus
- Compliant to PCI local bus specification(Revision 2.0)
- Software compatible with AMD’s Am7990
- LANCE, Am79C90 C-LANCE, Am79C960
- PCnet-ISA, Am79C961 PCnet-ISA+, Am79C965
- PCnet-32, and Am79C900 ILACC
- register and descriptor architecture
- Compatible with Am2100/Am1500T and Novell NE2100/NE1500 driver software
- High-performance Bus Master architecture with integrated DMA Buffer Management Unit for low CPU and bus utilization
- Big endian byte alignment supported
- Single +5 V power supply operation
- Low-power, CMOS design with sleep modes allows reduced power consumption for critical battery powered applications and Green PCs
- MicrowireTM EEPROM interface supports jumperless design
- Individual 136-byte transmit and 128-byte receive FIFOs provide frame buffering for increased system latency, and support the following features:
- — Automatic retransmission with no FIFO reload
- — Automatic receive stripping and transmit padding (individually programmable)
- — Automatic runt packet rejection
- — Automatic deletion of received collision frames
- Look-Ahead Packet Processing (LAPP) concept allows protocol analysis to begin before end of receive frame
- Integrated Manchester Encoder/Decoder
- Provides integrated Attachment Unit Interface (AUI) and 10BASE-T transceiver with automatic port selection
- Automatic Twisted-Pair receive polarity detection and automatic correction of the receive polarity
- Optional byte padding to long-word boundary on receive
- Dynamic transmit FCS generation programmable on a frame-by-frame basis
- Internal/external loopback capabilities
- Supports the following types of network interfaces:
- — AUI to external 10BASE2, 10BASE5,10BASE-T or 10BASE-F MAU
- — Internal 10BASE-T transceiver with Smart Squelch to Twisted-Pair medium
- NAND Tree test mode for connectivity testing on printed circuit boards
- 132-pin PQFP package
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 7,072
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
Featured Products
Top Sellers
-
100-CG2261
XILINX
Embedded Discrete Graphics Processor Unit BGA
-
AM186ED
XILINX
AM186ED 40VIW
-
AM188ES
XILINX
High Performance, 80C186-/80C188-Compatible and 80L186-/80L188-Compatible, 16-Bit Embedded Microcontrollers
-
AM486DX2-66V16BHI
XILINX
MPU AM486 RISC 32bit 0.35um 66MHz 5V 208-Pin SQFP
-
ADM6992
XILINX
4 CHANNEL(S), 100M bps, LOCAL AREA NETWORK CONTROLLER, PQFP128