This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

ISL28166FHZ-T7 +BOM

39µA Micropower Single and Dual Rail-to-Rail Input-Output Low Input Bias Current (RRIO) Op Amps

Manufacturer:

Intersil
Mfr.Part #:

ISL28166FHZ-T7
Datasheet:

ISL28166FHZ-T7 Datasheet (PDF)
Amplifier Type:

General Purpose
Number Of Circuits:

1
Output Type:

Rail-to-Rail
Slew Rate:

0.05V/µs
EDA/CAD Models:

Request Free CAD Models for ISL28166FHZ-T7

ISL28166FHZ-T7 General Description

Support is limited to customers who have already adopted these products.

The ISL28166 is a micropower precision operational amplifier optimized for single supply operation at 5V and can operate down to 2. 4V. This device features an Input Range Enhancement Circuit (IREC), which enables it to maintain CMRR performance for input voltages greater than the positive supply. The input signal is capable of swinging 0. 5V above a 5. 0V supply (0. 25 for a 2. 5V supply) and to within 10mV from ground. The output operation is rail-to-rail. The 1/f corner of the voltage noise spectrum is at 1kHz. This results in low frequency noise performance, which can only be found on device with an order of magnitude higher than the supply current. The ISL28166 can be operated from one lithium cell or two Ni-Cd batteries. The input range includes both positive and negative rail. The output swings to both rails.

Key Features

39µA typical supply current
5nA max input bias current
250kHz gain bandwidth product (A_V = 1)
2.4V to 5V single supply voltage range
Rail-to-rail input and output
Enable pin
Pb-free (RoHS compliant)

Specifications

Series	-	Amplifier Type	General Purpose
Number of Circuits	1	Output Type	Rail-to-Rail
Slew Rate	0.05V/µs	Gain Bandwidth Product	250 kHz
Current - Input Bias	1.14 nA	Voltage - Input Offset	7 µV
Current - Supply	39µA	Current - Output / Channel	31 mA
Voltage - Supply Span (Min)	2.4 V	Voltage - Supply Span (Max)	5 V
Operating Temperature	-40°C ~ 125°C	Mounting Type	Surface Mount