Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
Sample and Hold Amplifier 1 Circuit Single-Ended TO-99-8
TO-99-8MetalCanManufacturer:
Texas Instruments
Mfr.Part #:
JM38510/12501SGA
Datasheet:
Amplifier Type:
Sample and Hold
Number Of Circuits:
1
Output Type:
Single-Ended
Current - Input Bias:
25 nA
EDA/CAD Models:
Send all BOMs to
[email protected],
or fill out the form below for a quote on JM38510/12501SGA. Guaranteed response within
12hr.
Please fill in the short form below and we will provide you the quotation immediately.
The LF198 is a monolithic sample-and-hold circuit which utilizes BI-FET technology to obtain ultra-high dc accuracy with fast acquisition of signal and low droop rate. Operating as a unity gain follower, dc gain accuracy is 0.002% typical and acquisition time is as low as 6 μs to 0.01%. A bipolar input stage is used to achieve low offset voltage and wide bandwidth. Input offset adjust is accomplished with a single pin, and does not degrade input offset drift. The wide bandwidth allows the LF198 to be included inside the feedback loop of 1 MHz op amps without having stability problems. Input impedance of 1010Ω allows high source impedances to be used without degrading accuracy.
P-channel junction FET's are combined with bipolar devices in the output amplifier to give droop rates as low as 5 mV/min with a 1 μF hold capacitor. The JFET's have much lower noise than MOS devices used in previous designs and do not exhibit high temperature instabilities. The overall design ensures no feed-through from input to output in the hold mode, even for input signals equal to the supply voltages.
All trademarks are the property of their respective owners.
Series | - | Amplifier Type | Sample and Hold |
Number of Circuits | 1 | Output Type | Single-Ended |
Slew Rate | - | Current - Input Bias | 25 nA |
Voltage - Input Offset | 3 mV | Current - Supply | - |
Current - Output / Channel | 25 mA | Voltage - Supply Span (Min) | 10 V |
Voltage - Supply Span (Max) | 36 V | Operating Temperature | -55°C ~ 125°C (TA) |
Mounting Type | Through Hole |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
LM339N
Texas Instruments
1000+ $0.057
LM324
Texas Instruments
V capable, fast and stable operational amplifi
LM741
Texas Instruments
High-performance operational amplifier ideal for professional applications requiring precision and reliability
TL072
Texas Instruments
Ideal for precision analog circuits requiring low noise and distortio
LM311
Texas Instruments
Strobes signal output for easy threshold detection and aler