Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
High Performance and Ultra-Low-Power MCU for Zigbee®,Thread, and Bluetooth LE 5.0
BGAManufacturer:
Mfr.Part #:
K32W041K
Datasheet:
I<sub>DD</sub> [typ] (nA):
4.3,7.4,9.5,20.3
Junction Temperature (Min) (℃):
-40
Core Number Of Cores (SPEC):
1
GPIO:
22
EDA/CAD Models:
Send all BOMs to
[email protected],
or fill out the form below for a quote on K32W041K. Guaranteed response within
12hr.
Please fill in the short form below and we will provide you the quotation immediately.
The K32W061/41 portfolio is designed to power the next generation of ultra-low-current multiprotocol wireless IoT devices with support for IEEE 802.15.4 mesh network protocols Zigbee? and Thread? as well as Bluetooth? Low Energy 5.0. This portfolio also supports Matter, the unified IP-based application layer to work across ecosystems being developed by the Connectivity Standards Alliance, targeted for release by end of 2021.These wireless MCUs include multiple low-power modes and ultra-low radio Tx and Rx power consumption which enables IoT products powered by K32W061/41 to have extended battery life. With high Rx sensitivity and configurable Tx output power, the K32W061/41 MCUs offer reliable and robust connectivity performance.The K32W061/41 portfolio is powered by an Arm? Cortex?-M4 MCU and with 640 KB on-board flash and 152 KB SRAM, has enough room and flexibility for complex applications and over-the-air (OTA) upgrade capability without external memory. These devices also include a rich set of MCU digital and analog peripherals and multiple serial communication interfaces for embedded connected applications and a quad serial flash memory controller, SPIFI, that can be used to extend non-volatile memory.
I<sub>DD</sub> [typ] (nA) | 4.3,7.4,9.5,20.3 | Junction Temperature (Min) (℃) | -40 |
Core: Number of cores (SPEC) | 1 | GPIO | 22 |
Description | High Performance and Ultra-Low-Power MCU for Zigbee®,Thread, and Bluetooth LE 5.0 | Free Programmable CPU | Arm Cortex-M4 |
Supply Voltage [Min - Max] | 1.9,3.6 | Operating Frequency [Max] (MHz) | 48 |
Frequency (Max) (kHz) | 48000 | Supply Voltage [max] (V) | 3.6 |
Supply Voltage [min] (V) | 1.9 | I<sub>CC</sub> [typ] (mA) | 20.3 |
I<sub>DD</sub> [typ] (uA) | 4300,7400,9500,20300 | Memory Size (B) | 152000,640000 |
Supply Voltage [Min to Max] (V) | 1.9 to 3.6 | Peripheral Type | I²C,SPI,UART |
S<sub>RX</sub> [typ] FSK @ 10 kHz BW (dBm) | -100.0 | Serial Communication | 2 x I²C,2 x SPI,2 x UART |
Core Type | 1 x Arm Cortex-M4 | Number of pins | 40 |
SRAM (Bytes) | 152000 | I<sup>2</sup>C | 2 |
T<sub>vj</sub> [max] (℃) | 125 | Security Status | COMPANY PUBLIC |
SPI | 2 | NFC Tag | N |
Max Transmit Power (dBm) | 11 | Receive Current Consumption (mA) | 4.3 |
Internal Memory Supported | FLASH,SRAM | RX Sensitivity (dBm) | -100 |
UART | 2 | Flash (kB) | 640 |
Pad supply (V) | 1.9 to 3.6 | Junction Temperature (Max) (℃) | 125 |
Junction Temperature (Min to Max) (℃) | -40 to 125 | MCU Internal User Flash (SPEC) (kByte) | 640 |
Transmit Current Consumption (mA) | 20.3 @ 10dBm,7.4 @ 0dBm,9.5 @ 3dBm | Communication protocol | I²C,SPI,UART |
SRAM (kB) | 152 | Arm Core | Arm Cortex-M4 |
Master Interface | I²C,SPI,UART | Controller Interface | I²C,SPI,UART |
Product Category | RF Microcontrollers - MCU | Moisture Sensitive | Yes |
Product Type | RF Microcontrollers - MCU | Series | K32W041 |
Factory Pack Quantity | 2450 | Subcategory | Wireless & RF Integrated Circuits |
Technology | Si | Part # Aliases | 935385243557 |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
SAB6456
NXP Semiconductor
Sensitive 1 GHz divide-by-64/divide-by-256 switchable prescaler
SAA1064T
Nxp
High-performance image processing IC for versatile applications
NT3H1101W0FHKH
NXP Semiconductor
The NT3H1101W0FHKH NFC/RFID tag is compliant with NTAG I2C and NFC Forum type 2 Tag standards
CLRC66303HNY
Nxp
6303HNY is an NFC reader/writer that operates at a low power consumption of 17mA
HTRC11001T
NXP Semiconductor
HITAG reader solution