This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

KSZ8051MNLV +BOM

1/1 Transceiver 1/1 MII 32-QFN (5x5)

Manufacturer:

Microchip Technology
Mfr.Part #:

KSZ8051MNLV
Datasheet:

KSZ8051MNLV Datasheet (PDF)
Type:

Transceiver
Protocol:

MII
Number Of Drivers/Receivers:

1/1
Duplex:

1/1
EDA/CAD Models:

Request Free CAD Models for KSZ8051MNLV

KSZ8051MNLV General Description

The KSZ8051MNLV physical layer transceiver is a reliable and efficient solution for industrial temperature settings. Its integrated MAC and 10BASE-T/100BASE-TX/FX PHY make it suitable for a variety of networking applications. With advanced power-saving features, this transceiver is designed to meet the demands of harsh industrial environments while minimizing energy consumption. It complies with IEEE 802.3 specifications and supports MII and RMII interfaces, ensuring seamless integration with different microcontrollers and systems. Additionally, its auto-negotiation support allows for hassle-free configuration of connection speed and duplex mode, while built-in diagnostic tools enable efficient cable diagnostics and link quality monitoring. With a 3.3V power supply, the KSZ8051MNLV transceiver offers versatility and adaptability for a wide range of applications

Key Features

Single-Chip 10BASE-T/100BASE-TX IEEE 802.3 Compliant Ethernet Transceiver
AEC-Q100 Qualified for Automotive Applications
MII Interface Support (KSZ8051MNL)
RMII v1.2 Interface Support with a 50 MHz Reference Clock Output to MAC, and an Option to Input a 50 MHz Reference Clock (KSZ8051RNL)
Back-to-Back Mode Support for a 100 Mbps Copper Repeater
MDC/MDIO Management Interface for PHY Register Configuration
Programmable Interrupt Output
LED Outputs for Link, Activity, and Speed Status Indication
On-Chip Termination Resistors for the Differential Pairs
Baseline Wander Correction
HP Auto MDI/MDI-X to Reliably Detect and Correct Straight-Through and Crossover Cable Connections with Disable and Enable Option
Auto-Negotiation to Automatically Select the Highest Link-Up Speed (10/100 Mbps) and Duplex (Half/Full)
Power-Down and Power-Saving Modes
LinkMD® TDR-Based Cable Diagnostics to Identify Faulty Copper Cabling
Parametric NAND Tree Support for Fault Detection Between Chip I/Os and the Board
Loopback Modes for Diagnostics
Single 3.3V Power Supply with VDD I/O Options for 1.8V, 2.5V, or 3.3V
Built-In 1.2V Regulator for Core
Available in 32-pin 5 mm x 5 mm QFN Package

Specifications

Type	Transceiver	Protocol	MII
Number of Drivers/Receivers	1/1	Duplex	1/1
Receiver Hysteresis	400 mV	Data Rate	10Mbps, 100Mbps
Voltage - Supply	3.135V ~ 3.465V	Operating Temperature	-40°C ~ 105°C (TA)
Mounting Type	Surface Mount