Payment Method
LM4132BMF-3.3/NOPB +BOM
0.05% 20-ppm/°C drift precision series voltage reference with shutdown enable
SOT23-5-
Manufacturer:
-
Mfr.Part #:
LM4132BMF-3.3/NOPB
-
Datasheet:
-
VO (V):
1.8, 2.048, 2.5, 3, 3.3, 4.1
-
Initial Accuracy (max) (%):
0.05, 0.1, 0.2, 0.4, 0.5
-
Temp Coeff (max) (ppm/°C):
10, 20, 30
-
Vin (min) (V):
2.2
-
EDA/CAD Models:
Send all BOMs to [email protected], or fill out the form below for a quote on LM4132BMF-3.3/NOPB. Guaranteed response within 12hr.
Availability: 6686 PCS
Please fill in the short form below and we will provide you the quotation immediately.
LM4132BMF-3.3/NOPB General Description
The LM4132 family of precision voltage references performs comparable to the best laser-trimmed bipolar references, but in cost-effective CMOS technology. The key to this breakthrough is the use of EEPROM registers for correction of curvature, temperature coefficient (tempco), and accuracy on a CMOS band-gap architecture allowing package-level programming to overcome assembly shift. The shifts in voltage accuracy and tempco during assembly of die into plastic packages limit the accuracy of references trimmed with laser techniques.
Unlike other LDO references, the LM4132 can deliver up to 20 mA and does not require an output capacitor or buffer amplifier. These advantages along with the SOT-23 packaging are important for space-critical applications.
Series references provide lower power consumption than shunt references, because they do not have to idle the maximum possible load current under no-load conditions. This advantage, the low quiescent current (60 µA), and the low dropout voltage (400 mV) make the LM4132 ideal for battery-powered solutions.
The LM4132 is available in five grades (A, B, C, D and E) for greater flexibility. The best grade devices (A) have an initial accuracy of 0.05% with a specified temperature coefficient of 10 ppm/°C or less, while the lowest grade devices (E) have an initial accuracy of 0.5% and a tempco of 30 ppm/°C.
Key Features
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 2
- Output Initial Voltage Accuracy: 0.05%
- Low Temperature Coefficient: 10 ppm/°C
- Low Supply Current: 60 µA
- Enable Pin Allowing a 3-µA Shutdown Mode
- 20-mA Output Current
- Voltage Options: 1.8 V, 2.048 V, 2.5 V, 3 V, 3.3 V, 4.096 V
- Custom Voltage Options Available (1.8 V to 4.096 V)
- VIN Range of VREF + 400 mV to 5.5 V at 10 mA
- Stable With Low-ESR Ceramic Capacitors
Specifications
VO (V) | 1.8, 2.048, 2.5, 3, 3.3, 4.1 | Initial accuracy (max) (%) | 0.05, 0.1, 0.2, 0.4, 0.5 |
Temp coeff (max) (ppm/°C) | 10, 20, 30 | Vin (min) (V) | 2.2 |
Vin (max) (V) | 5.5 | Iq (typ) (mA) | 0.06 |
Rating | Catalog | Features | Enable pin |
LFN 0.1 to 10 Hz (typ) (µVPP) | 170, 190, 240, 285, 310, 350 | Iout/Iz (max) (mA) | 20 |
Operating temperature range (°C) | -40 to 125 | Shutdown current (ISD) (typ) (µA) | 3 |
feature-reference-type | Precision | feature-topology | Series |
feature-initial-accuracy | 0.1% | feature-maximum-temperature-coefficient | 20ppm/°C |
feature-output-voltage-v | 3.3 | feature-maximum-input-voltage-v | 6 |
feature-maximum-output-current-ma | 20 | feature-packaging | Tape and Reel |
feature-rad-hard | feature-pin-count | 5 | |
feature-cecc-qualified | No | feature-esd-protection | Yes |
feature-escc-qualified | feature-military | No | |
feature-aec-qualified | No | feature-aec-qualified-number | |
feature-eccn-code | EAR99 | feature-svhc | No |
feature-svhc-exceeds-threshold | No |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
LM4132BMF-3.3/NOPB Datasheet PDF
LM4132BMF-3.3/NOPB PDF Preview
In Stock: 6,686
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.