Payment Method
LMH6639MF/NOPB +BOM
190MHz Rail-to-Rail Output Amplifier with Disable
SOT-23 (DBV)-6-
Manufacturer:
-
Mfr.Part #:
LMH6639MF/NOPB
-
Datasheet:
-
Pbfree Code:
Yes
-
Part Life Cycle Code:
Active
-
Pin Count:
6
-
Reach Compliance Code:
compliant
-
EDA/CAD Models:
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for LMH6639MF/NOPB, guaranteed quotes back within 12hr.
Availability: 5367 PCS
Please fill in the short form below and we will provide you the quotation immediately.
LMH6639MF/NOPB General Description
The LMH6639 is a voltage feedback operational amplifier with a rail-to-rail output drive capability of 110mA. Employing TI’s patented VIP10 process, the LMH6639 delivers a bandwidth of 190MHz at a current consumption of only 3.6mA. An input common mode voltage range extending to 0.2V below the V− and to within 1V of V+, makes the LMH6639 a true single supply op-amp. The output voltage range extends to within 30mV of either supply rail providing the user with a dynamic range that is especially desirable in low voltage applications.
The LMH6639 offers a slew rate of 172V/μs resulting in a full power bandwidth of approximately 28MHz. The LMH6639 also offers protection for the input transistors by using two anti-parallel diodes and a series resistor connected across the inputs. The TON value of 83nsec combined with a settling time of 33nsec makes this device ideally suited for multiplexing applications (see application note for details). Careful attention has been paid to ensure device stability under all operating voltages and modes. The result is a very well behaved frequency response characteristic for any gain setting including +1, and excellent specifications for driving video cables including harmonic distortion of −60dBc, differential gain of 0.12% and differential phase of 0.045°
Key Features
- (VS = 5V, Typical Values Unless Specified)
- Supply Current (No Load) 3.6mA
- Supply Current (Off Mode) 400μA
- Output Resistance (Closed Loop 1MHz) 0.186Ω
- −3dB BW (AV = 1) 190MHz
- Settling Time 33nsec
- Input Common Mode Voltage −0.2V to 4V
- Output Voltage Swing 40mV from Rails
- Linear Output Current 110mA
- Total Harmonic Distortion −60dBc
- Fully Characterized for 3V, 5V and ±5V
- No Output Phase Reversal with CMVR Exceeded
- Excellent Overdrive Recovery
- Off Isolation 1MHz −70dB
- Differential Gain 0.12%
- Differential Phase 0.045°
All trademarks are the property of their respective owners.
Specifications
Source Content uid | LMH6639MF/NOPB | Pbfree Code | Yes |
Part Life Cycle Code | Active | Pin Count | 6 |
Reach Compliance Code | compliant | ECCN Code | EAR99 |
HTS Code | 8542.33.00.01 | Amplifier Type | OPERATIONAL AMPLIFIER |
Architecture | VOLTAGE-FEEDBACK | Average Bias Current-Max (IIB) | 3.25 µA |
Bandwidth (3dB)-Nom | 63 MHz | Bias Current-Max (IIB) @25C | 2.6 µA |
Common-mode Reject Ratio-Min | 72 dB | Common-mode Reject Ratio-Nom | 95 dB |
Frequency Compensation | YES | Input Offset Current-Max (IIO) | 0.8 µA |
Input Offset Voltage-Max | 5000 µV | JESD-30 Code | R-PDSO-G6 |
JESD-609 Code | e3 | Length | 2.92 mm |
Low-Bias | NO | Low-Offset | NO |
Micropower | NO | Moisture Sensitivity Level | 1 |
Neg Supply Voltage Limit-Max | -6.3 V | Neg Supply Voltage-Nom (Vsup) | -5 V |
Number of Functions | 1 | Number of Terminals | 6 |
Operating Temperature-Max | 85 °C | Operating Temperature-Min | -40 °C |
Packing Method | TR | Peak Reflow Temperature (Cel) | 260 |
Power | NO | Programmable Power | NO |
Qualification Status | Not Qualified | Seated Height-Max | 1.22 mm |
Slew Rate-Min | 120 V/us | Slew Rate-Nom | 200 V/us |
Supply Current-Max | 5.8 mA | Supply Voltage Limit-Max | 6.3 V |
Supply Voltage-Nom (Vsup) | 5 V | Surface Mount | YES |
Technology | BIPOLAR | Temperature Grade | INDUSTRIAL |
Terminal Finish | MATTE TIN | Terminal Form | GULL WING |
Terminal Pitch | 0.95 mm | Terminal Position | DUAL |
Time@Peak Reflow Temperature-Max (s) | 30 | Unity Gain BW-Nom | 228000 |
Voltage Gain-Min | 5011.872 | Wideband | YES |
Width | 1.6 mm |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 5,367
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.