This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LT1795IFE#TR +BOM

High-speed ADSL transmission for efficient data exchang

Manufacturer:

Analog Devices, Inc
Mfr.Part #:

LT1795IFE#TR
Datasheet:

LT1795IFE#TR Datasheet (PDF)
Series:

LT1795
Number Of Channels:

2 Channel
SR - Slew Rate:

900 V/us
CMRR - Common Mode Rejection Ratio:

62 dB
EDA/CAD Models:

Request Free CAD Models for LT1795IFE#TR

LT1795IFE#TR General Description

The LT1795 is a dual current feedback amplifier with high output current and excellent large signal characteristics. The combination of high slew rate, 500mA output drive and up to ±15V operation enables the device to deliver significant power at frequencies in the 1MHz to 2MHz range. Short-circuit protection and thermal shutdown insure the device’s ruggedness. The LT1795 is stable with large capacitive loads and can easily supply the large currents required by the capacitive loading. A shutdown feature switches the device into a high impedance, low current mode, reducing power dissipation when the device is not in use. For lower bandwidth applications, the supply current can be reduced with a single external resistor.

The LT1795 comes in the very small, thermally enhanced, 20-lead TSSOP package for maximum port density in line driver applications.

Key Features

500mA Output Drive Current
50MHz Bandwidth, = 25Ω
900V/µs Slew Rate, = 25Ω
Low Distortion: −75dBc at 1MHz
High Input Impedance, 10MΩ
Wide Supply Range, ±5V to ±15V
Full Rate, Downstream ADSL Supported
Low Power Shutdown Mode
Power Saving Adjustable Supply Current
Stable with>
Power Enhanced Small Footprint Packages TSSOP-20, S0-20 Wide
Available in a 20-Lead TSSOP Package

Application

ADSL HDSL2, G.lite Drivers
Buffers
Test Equipment Amplifiers
Video Amplifiers
Cable Drivers

Specifications

Product Category:	High Speed Operational Amplifiers	Series:	LT1795
Number of Channels:	2 Channel	SR - Slew Rate:	900 V/us
CMRR - Common Mode Rejection Ratio:	62 dB	Output Current per Channel:	1 A
Supply Voltage - Max:	36 V	Supply Voltage - Min:	10 V
Operating Supply Current:	29 mA	en - Input Voltage Noise Density:	3.6 nV/rtHz
Height:	1.2 mm	In - Input Noise Current Density:	2 pA/rtHz
Product Type:	Op Amps - High Speed Operational Amplifiers	Subcategory:	Amplifier ICs