Payment Method
M38510/30905BEA +BOM
Data Selectors/Multiplexers With 3-State Outputs
CDIP(J)-
Manufacturer:
-
Mfr.Part #:
M38510/30905BEA
-
Datasheet:
-
Technology Family:
LS
-
Function:
Digital Multiplexer
-
Configuration:
8:1
-
Number Of Channels:
1
-
EDA/CAD Models:
Send all BOMs to [email protected], or fill out the form below for a quote on M38510/30905BEA. Guaranteed response within 12hr.
Availability: 4131 PCS
Please fill in the short form below and we will provide you the quotation immediately.
M38510/30905BEA General Description
These monolithic data selectors/multiplexers contain full on-chip binary decoding to select one-of-eight data sources and feature a strobe-controlled three-state output. The strobe must be at a low logic level to enable these devices. The three-state outputs permit a number of outputs to be connected to a common bus. When the strobe input is high, both outputs are in a high-impedance state in which both the upper and lower transistors of each totem-pole output are off, and the output neither drives nor loads the bus significantly. When the strobe is low, the outputs are activated and operate as standard TTL totem-pole outputs.
To minimize the possibility that two outputs will attempt to take a common bus to opposite logic levels, the output control circuitry is designed so that the average output disable time is shorter than the average output enable time. The SN54251 and SN74251 have output clamp diodes to attenuate reflections on the bus line.
Key Features
- Three-State Versions of '151, 'LS151, 'S151
- Three State Outputs Interface Directly with System Bus
- Perform Parallel-to-Serial Conversion
- Permit Multiplexing from N-Lines to One Line
- Complementary Outputs Provide True and Inverted Data
- Fully Compatible with Most TTL Circuits
Specifications
Technology family | LS | Function | Digital Multiplexer |
Configuration | 8:1 | Number of channels | 1 |
Operating temperature range (°C) | -55 to 125 | Rating | Military |
feature-logic-family | LS | feature-logic-function | Multiplexer |
feature-configuration | 1 x 8:1 | feature-number-of-elements-per-chip | 1 |
feature-number-of-inputs-per-chip | 8 | feature-number-of-outputs-per-chip | 1 |
feature-polarity | Inverting/Non-Inverting | feature-process-technology | Bipolar |
feature-output-type | 3-State | feature-maximum-low-level-output-current-ma | 4 |
feature-maximum-high-level-output-current-ma | -1 | feature-minimum-operating-supply-voltage-v | 4.5 |
feature-maximum-operating-supply-voltage-v | 5.5 | feature-tolerant-i-os-v | |
feature-maximum-power-dissipation-mw | 35(Typ) | feature-packaging | Tube |
feature-rad-hard | No | feature-pin-count | 16 |
feature-cecc-qualified | No | feature-esd-protection | |
feature-escc-qualified | feature-military | ||
feature-aec-qualified | No | feature-aec-qualified-number | |
feature-eccn-code | EAR99 | feature-svhc | Yes |
feature-svhc-exceeds-threshold | No |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 4,131
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.