Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
Active Filter Dual SW-CAP UNIV 4th Order 57kHz 24-Pin SOIC W T/R
BGAManufacturer:
Mfr.Part #:
MAX261BCWG-T
Datasheet:
Series:
MAX261B
Cutoff Frequency:
57 kHz
Number Of Channels:
2 Channel
Supply Voltage - Max:
12.6 V
EDA/CAD Models:
Send all BOMs to
[email protected],
or fill out the form below for a quote on MAX261BCWG-T. Guaranteed response within
12hr.
Please fill in the short form below and we will provide you the quotation immediately.
The MAX260/MAX261/MAX262 CMOS dual second-order universal switched-capacitor active filters allow microprocessor control of precise filter functions. No external components are required for a variety of bandpass, lowpass, highpass, notch, and allpass configurations. Each device contains two second-order filter sections that place center frequency, Q, and filter operating mode under programmed control. An input clock, along with a 6-bit f0 program input, determine the filter's center or corner frequency without affecting other filter parameters. The filter Q is also programmed independently. Separate clock inputs for each filter section operate with either a crystal, RC network, or external clock generator. The MAX260 has offset and DC specifications superior to the MAX261 and MAX262 and a center frequency (f0) range of 7.5kHz. The MAX261 handles center frequencies to 57kHz, while the MAX262 extends the center frequency range to 140kHz by employing lower clock-to-f0 ratios. All devices are available in 24-pin DIP and small outline packages in commercial, extended, and military temperature ranges.
Product Category: | Active Filters | Series: | MAX261B |
Cutoff Frequency: | 57 kHz | Number of Channels: | 2 Channel |
Supply Voltage - Max: | 12.6 V | Supply Voltage - Min: | 4.74 V |
Minimum Operating Temperature: | 0 C | Maximum Operating Temperature: | + 70 C |
Mounting Style: | SMD/SMT | Packaging: | MouseReel |
Height: | 2.35 mm | Length: | 15.6 mm |
Product Type: | Active Filters | Factory Pack Quantity: | 1000 |
Subcategory: | Filters | Width: | 7.6 mm |
Part # Aliases: | MAX261B | Unit Weight: | 0.025909 oz |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.