Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
RF Detector
BGAManufacturer:
Mfr.Part #:
MAX4003EBL-T
Datasheet:
Frequency:
100MHz ~ 2.5GHz
RF Type:
Cellular, TDMA, CDMA, GPRS, GSM
Input Range:
-45dBm ~ 0dBm
Voltage - Supply:
2.7V ~ 5V
EDA/CAD Models:
Send all BOMs to
[email protected],
or fill out the form below for a quote on MAX4003EBL-T. Guaranteed response within
12hr.
Please fill in the short form below and we will provide you the quotation immediately.
The MAX4003 low-cost, low-power logarithmic amplifier is designed to detect the power levels of RF power amplifiers (PAs) operating from 100MHz to 2500MHz. A typical dynamic range of 45dB makes this logarithmic amplifier useful in a variety of wireless applications including cellular handset PA control, TSSI for wireless terminal devices, and other transmitter power measurements. This logarithmic amplifier provides much wider measurement range and superior accuracy than typical diode-based detectors. Excellent temperature stability is achieved over the full operating range of -40°C to +85°C. The MAX4003 logarithmic amplifier is a voltage-measuring device with a typical signal range of -58dBV to -13dBV. The input signal is internally AC-coupled by an on-chip 5pF capacitor in series with a 2kΩ resistance. This highpass coupling, with a corner at 16MHz, sets the lowest operating frequency and allows the input signal source to be DC grounded. The MAX4003 also features a power-on delay, which holds the detector output (OUT) low for approximately 5μs to ensure glitchless controller output. The MAX4003 is available in an 8-bump chip-scale package (UCSP), an 8-pin μMAX package, and an 8-pin thin QFN package. The device consumes 5.9mA with a 3.0V supply and only 13μA when the device is in shutdown.
Category | RF and WirelessRF Detectors | Series | - |
Frequency | 100MHz ~ 2.5GHz | RF Type | Cellular, TDMA, CDMA, GPRS, GSM |
Input Range | -45dBm ~ 0dBm | Accuracy | - |
Voltage - Supply | 2.7V ~ 5V | Current - Supply | 5.9 mA |
Mounting Type | Surface Mount | Base Product Number | MAX400 |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.