This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

NCA9306GXX +BOM

Voltage Level Translator Bidirectional 1 Circuit 2 Channel 100MHz 8-X2SON (1.35x0.8)

Manufacturer:

Nexperia Semiconductor (NXP)
Mfr.Part #:

NCA9306GXX
Datasheet:

NCA9306GXX Datasheet (PDF)
Type:

2-bit Bidirectional Multi-Voltage Level Translator
Mounting Style:

SMD/SMT
Supply Voltage - Min:

950 mV
Supply Voltage - Max:

5 V
EDA/CAD Models:

Request Free CAD Models for NCA9306GXX

NCA9306GXX General Description

The NCA9306 is a 2 channel bidirectional I²C and SMBus multi-voltage level translator with an enable (EN) pin input. It allows voltage translation between 0.95 V and 5 V without the use of a direction pin. It supports up to 100 MHz up translation and >100 MHz down translation at ≤ 30 pF capacitive load. There is no need for a direction pin which minimizes the system effort. The NCA9306 supports 5 V tolerant I/O pins to support mixed mode signal operation. The ability to set up different voltage translation levels on each channel makes the device very flexible and suitable for a lot of different applications.The low ON-state resistance R of the switch allows connections to be made with minimal propagation delay. When EN is HIGH, the translator switch is on, and the SCLA and SDAA I/O are connected to the SCLB and SDAB I/O respectively, allowing bidirectional data flow between ports. When EN is LOW, the translator switch is off, and a high-impedance state exists between ports. As with the standard I²C bus-system, pull-up resistors are required to provide the logic HIGH levels on the translators bus. The NCA9306 has a standard open-drain configuration of the I²C-bus. The size of these pull-up resistors depend on the system. Each side of the translator must have a pull-up resistors. NCA9306 is designed to work with Standard-mode, Fast-mode and Fast-mode plus I²C bus devices in addition to the SMBus devices.When the SDAA or SDAB pin is LOW, the clamp is in the ON-state and a low resistance connections exists between the SDAA and SDAB ports. Assuming the higher voltage is on the SDAB port when the SDAB port is HIGH, the voltage on the SDAA port is limited to the voltage set by refA. When the SDAA port is HIGH, the SDAB port is pulled to the refB supply voltage by the pull-up resistors. The SCLA or SCLB pins also follows the same behavior as described for SDAA or SDAB pins.

Key Features

2-channel bidirectional voltage translator for SDA and SCL lines in mixed mode I²C bus applications
Open-drain I²C-bus I/O ports (SCLA, SDAA, SCLB and SDAB)
Provides bidirectional voltage translation with no direction pin
High-impedance SCLA, SDAA, SCLB and SDAB for EN = LOW
Up translation< 100 MHz; CL = 30 pF< 40 MHz; CL = 50 pF
< 100 MHz; CL = 30 pF
< 40 MHz; CL = 50 pF
Down translation> 100 MHz; CL = 30 pF< 40 MHz; CL = 50 pF
> 100 MHz; CL = 30 pF
< 40 MHz; CL = 50 pF
Hot insertion
Bidirectional voltage level translation between:0.95 V and 1.8 V, 2.5 V, 3.3 V and 5.0 V1.2 V and 1.8 V, 2.5 V, 3.3 V and 5.0 V1.8 V and 2.5 V, 3.3 V and 5.0 V2.5 V and 3.3 V and 5.0 V3.3 V and 5.0 V
0.95 V and 1.8 V, 2.5 V, 3.3 V and 5.0 V
1.2 V and 1.8 V, 2.5 V, 3.3 V and 5.0 V
1.8 V and 2.5 V, 3.3 V and 5.0 V
2.5 V and 3.3 V and 5.0 V
3.3 V and 5.0 V
Low standby current
5 V tolerant I²C-bus I/O pins to support mixed mode signal operation
Low RON provides less signal distortion
Latch-up performance exceeds 100 mA per JESD78 class II level A
ESD protection:HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 VCDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V
HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V
CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V
Specified from -40 °C to +125 °C

Nexperia Semiconductor (NXP) Original Stock

Application

GPIO, MDIO, PMBus, SMBus, SDIO, UART, I²C, and other interfaces in Telecom infrastructure
Industrial
Personal computing
Router and Industrial Automation

Specifications

Product Category:	Translation - Voltage Levels	Type:	2-bit Bidirectional Multi-Voltage Level Translator
Mounting Style:	SMD/SMT	Supply Voltage - Min:	950 mV
Supply Voltage - Max:	5 V	Minimum Operating Temperature:	- 40 C
Maximum Operating Temperature:	+ 125 C	Propagation Delay Time:	0.2 ns, 0.24 ns, 0.3 ns, 0.45 ns
Packaging:	MouseReel	Number of Channels:	2 Channel
Output Type:	Open Drain, Push-Pull	Pd - Power Dissipation:	300 mW
Product Type:	Translation - Voltage Levels	Factory Pack Quantity:	10000
Subcategory:	Logic ICs	Part # Aliases:	935691025115