This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

NX20P0407UKZ +BOM

USB Type-C CC and SBU Protection IC

Manufacturer:

NXP Semiconductor
Mfr.Part #:

NX20P0407UKZ
Datasheet:

NX20P0407UKZ Datasheet (PDF)
Supply Voltage [Min To Max] (V):

2.5 to 5.5
VDC Absolute (Max) (V):

28
Isw (A):

1.25
R<sub>DSon</sub> (mohm):

160,3600
EDA/CAD Models:

Request Free CAD Models for NX20P0407UKZ

NX20P0407UKZ General Description

NX20P0407 is a single chip USB type-C port protection solution. CC1/CC2 and SBU1/SBU2 pins in system side are protected from up to 28V short to VBUS, which pins are located right next VBUS pins.USB Type-C allows VBUS voltage to increase up to 20V through Power delivery protocol, the concern is that these CC1/2 and SBU1/2 pins can be shorted with VBUS when plugging out with mechanical twisted connector since Type-C connector contact pin is 25% closer to each other than prior generation connector, micro USB which most mobile devices have been using. Another concern is that moisture or fine dust may cause short to 20V VBUS with next to pins.NX20P0407 enables CC and SBU to be more robust in even abnormal conditions. NX20P0407 has 28VDC tolerant on CON_CC1, CON_CC2, CON_SBU1 and CON_SBU2 pins in connector side and quickly disconnects switches if the voltage is above overvoltage threshold, CC1, CC2, SBU1 and SBU2 in system side are protected from the high voltage.NX20P0407 integrates IEC 61000-4-2 ESD protection on CON_CC1 and CON_CC2, +15KV air discharge and +8KV contact discharge, which helps to reduce external BOM cost. NX20P0407 CON_CC1 and CON_CC2 pins are designed to be protected from surge up to +/- 35V.