Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
Prescaler, ECL Series, 1-Func, Bipolar, PDSO8, PLASTIC, SO-8
SOP8PManufacturer:
Mfr.Part #:
PMB2313T
Datasheet:
Part Life Cycle Code:
Transferred
Pin Count:
8
HTS Code:
8542.39.00.01
Additional Feature:
STANDBY MODE
EDA/CAD Models:
Send all BOMs to
[email protected],
or fill out the form below for a quote on PMB2313T. Guaranteed response within
12hr.
Please fill in the short form below and we will provide you the quotation immediately.
OverviewFunctional Description/ ApplicationThis IC is designed for use in mobile radio communication devices up to 1100 MHz.Due to low power consumption and low phase noise generation, the PMB2313T is suitable for use in battery powered handheld systems, e.g. GSM, cordless telephones and cordless consumer products, as well as in basestations.Low supply voltage down to 2.7V. It can be switched to a low-power standby mode. Internal current source at the emitter follower output.No external resistor needed in typical applications.The divide ratio is 1:64/65 or 1:128/129 depending on the external circuit configuration.The IC is board level compatible to the PMB 2312 prescaler.Circuit DescriptionThe differential inputs of the IC may be connected either balanced or single ended. In the latter case the unused input must be RF-grounded with a capacitor (about 1.5 nF) with a low serial inductance.Depending on the logic level at SW input the basic divide ratio of the ECL-stages is fixed to 1:64/65 or 1:128/129.The MOD input determines whether modulus 1:n or 1:n+1 (n=64 or 128 according to SW-level) is active.The IC can be switched to a low-power standby mode (input STB).The MOD input is TTL/CMOS compatible.The emitter follower output is CMOS compatible according to the application circuit on page 11. The minimum logic swing is 0.8 Vpp.
Part Life Cycle Code | Transferred | Pin Count | 8 |
Reach Compliance Code | HTS Code | 8542.39.00.01 | |
Additional Feature | STANDBY MODE | Family | ECL |
JESD-30 Code | R-PDSO-G8 | Load Capacitance (CL) | 8 pF |
Logic IC Type | PRESCALER | Number of Data/Clock Inputs | 1 |
Number of Functions | 1 | Number of Terminals | 8 |
Operating Temperature-Max | 85 °C | Operating Temperature-Min | -40 °C |
Output Characteristics | EMITTER FOLLOWER | Power Supply Current-Max (ICC) | 2.5 mA |
Qualification Status | Not Qualified | Supply Voltage-Max (Vsup) | 5.5 V |
Supply Voltage-Min (Vsup) | 2.7 V | Supply Voltage-Nom (Vsup) | 5 V |
Surface Mount | YES | Technology | BIPOLAR |
Temperature Grade | INDUSTRIAL | Terminal Form | GULL WING |
Terminal Position | DUAL | fmax-Min | 1100 MHz |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.