Payment Method
S-8241ABPMC-GBPT2G +BOM
S-8241ABPMC-GBPT2G: Li-Ion/Li-Pol Battery Protection in SOT-23 Package
SOT-23-5-
Manufacturer:
-
Mfr.Part #:
S-8241ABPMC-GBPT2G
-
Datasheet:
-
Pbfree Code:
Yes
-
Part Life Cycle Code:
Not Recommended
-
Pin Count:
5
-
Reach Compliance Code:
compliant
-
EDA/CAD Models:
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for S-8241ABPMC-GBPT2G, guaranteed quotes back within 12hr.
Availability: 6412 PCS
Please fill in the short form below and we will provide you the quotation immediately.
S-8241ABPMC-GBPT2G General Description
The S-8241ABPMC-GBPT2G from Epson Electronics is a high-quality lithium-ion battery protection IC that ensures the safety and longevity of single-cell lithium-ion batteries. With features such as overcharge protection, over-discharge protection, overcurrent protection, and short circuit protection, this IC provides comprehensive protection during both charging and discharging cycles
Key Features
- (1) Internal high-accuracy voltage detection circuit
- Overcharge detection voltage: 3.9 to 4.4 V (5 mV-step)
- Accuracy of ±25 mV(+25 °C) and ± 30 mV(−5 to +55 °C)
- Overcharge release voltage: 3.8 to 4.4 V1 Accuracy of ±50 mV
- Overdischarge detection voltage: 2.0 to 3.0 V (100 mV-step) Accuracy of ±80 mV
- Overdischarge release voltage: 2.0 to 3.4 V2 Accuracy of ±100 mV
- Overcurrent 1 detection voltage: 0.05 to 0.3 V (5 mV-step) Accuracy of ±20 mV
- Overcurrent 2 detection voltage: 0.5 V (fixed) Accuracy of ±100 mV
- (2) A high voltage withstand device isused for charger connection pins
- (VM and CO pins: Absolute maximum rating = 26 V)
- (3) Delay times (overcharge: tCU; overdischarge: tDL; overcurrent 1: tlOV1 ; overcurrent 2: tlOV2) are generated by an internal circuit. (External capacitors are unnecessary.) Accuracy of ±30%
- (4) Internal three-step overcurrent detection circuit (overcurrent 1, overcurrent 2, and load short-circuiting)
- (5) Either the 0 V battery charging function or 0 V battery charge inhibiting function can be selected.
- (6) Products with and without a power-down function can be selected.
- (7) Charger detection function and abnormal charge current detection function
- The overdischarge hysterisis is released by detecting a negative VM pin voltage (typ. −1.3 V) (Charger detection function).
- If the output voltage at DO pin is high and the VM pin voltage becomes equalto or lower than the charger detection voltage (typ. −1.3 V), the output voltage at CO pin goes low (Abnormal charge current detection function).
- (8) Low current consumption
- Operation: 3.0 μA typ. 5.0 μA max.
- Power-down mode: 0.1 μA max.
- (9) Wide operating temperature range: −40 to +85 °C
- (10) Small package SOT-23-5, SNT-6A
- (11) Lead-free products
- 1.Overcharge release voltage = Overcharge detection voltage - Overcharge hysteresis
- The overcharge hysteresis can be selected in the range 0.0, or 0.1 to 0.4 V in 50 mV steps. (However, selection
- “Overcharge release voltage<3.8 V” is enabled.)
- 2.Overdischarge release voltage = Overdischarge detection voltage + Overdischarge hysteresis
- The overdischarge hysteresis can be selected in the range 0.0 to 0.7 V in100 mV steps. (However, selection
- “Overdischarge release voltage>3.4 V” is enabled.)
Specifications
Pbfree Code | Yes | Part Life Cycle Code | Not Recommended |
Pin Count | 5 | Reach Compliance Code | compliant |
ECCN Code | EAR99 | HTS Code | 8542.39.00.01 |
Adjustable Threshold | NO | Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
JESD-30 Code | R-PDSO-G5 | Length | 2.9 mm |
Number of Channels | 1 | Number of Functions | 1 |
Number of Terminals | 5 | Operating Temperature-Max | 85 °C |
Operating Temperature-Min | -40 °C | Peak Reflow Temperature (Cel) | 260 |
Qualification Status | Not Qualified | Seated Height-Max | 1.3 mm |
Supply Voltage-Max (Vsup) | 8 V | Supply Voltage-Min (Vsup) | 1.5 V |
Supply Voltage-Nom (Vsup) | 3.5 V | Surface Mount | YES |
Temperature Grade | INDUSTRIAL | Terminal Form | GULL WING |
Terminal Pitch | 0.95 mm | Terminal Position | DUAL |
Time@Peak Reflow Temperature-Max (s) | 10 | Width | 1.6 mm |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 6,412
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $0.367 | $0.37 |
200+ | $0.141 | $28.20 |
500+ | $0.137 | $68.50 |
1000+ | $0.135 | $135.00 |
The prices below are for reference only.