Payment Method
SCC2691AE1A28 +BOM
Data communication
PLCC-28-
Manufacturer:
-
Mfr.Part #:
SCC2691AE1A28
-
Datasheet:
-
Pbfree Code:
Yes
-
Part Life Cycle Code:
Obsolete
-
Pin Count:
28
-
ECCN Code:
EAR99
-
EDA/CAD Models:
Send all BOMs to [email protected], or fill out the form below for a quote on SCC2691AE1A28. Guaranteed response within 12hr.
Availability: 6881 PCS
Please fill in the short form below and we will provide you the quotation immediately.
SCC2691AE1A28 General Description
The SCC2691AE1A28 ACE offered by NXP Semiconductors is a highly versatile and capable solution for asynchronous communications. Boasting two integrated serial communication channels, this device supports a variety of protocols, including UART, USART, and IrDA. Its built-in baud rate generator allows for operation at speeds of up to 1.5 Mbps, ensuring high performance across diverse applications. With a 4-byte FIFO buffer per channel, the ACE effectively minimizes CPU overhead for data handling, optimizing system efficiency. In addition, modem control signals for hardware flow control further enhance the device's utility in communication tasks. Operating within a power supply range of 4.5V to 5.5V, this ACE is well-suited for embedded applications, while its 28-pin SOIC package ensures compatibility with standard PCB layouts. With its robust design, low power consumption, and extensive feature set, the SCC2691AE1A28 is an excellent choice for communication needs in embedded systems, industrial automation, and telecommunications
Key Features
- Full-duplex asynchronous receiver/transmitter
- Quadruple buffered receiver data register
- Programmable data format:
- – 5 to 8 data bits plus parity
- – Odd, even, no parity or force parity
- – 1, 1.5 or 2 stop bits programmable in 1/16-bit increments
- 16-bit programmable Counter/Timer
- Baud rate for the receiver and transmitter selectable from:
- – 22 fixed rates: 50 to 115.2K baud
- – Non-standard rates to 115.2 kb
- – Non-standard user-defined rate derived from programmable timer/ counter
- – External 1X or 16X clock
- Parity, framing, and overrun detection
- False start bit detection
- Line break detection and generation
- Programmable channel mode
- – Normal (full-duplex)
- – Automatic echo
- – Local loopback
- – Remote Loopback
- Multi-function programmable 16-bit counter/timer
- Single interrupt output with seven maskable interrupting conditions
- On-chip crystal oscillator
- Low power mode
- TTL compatible
- Single +5V power supply
- Commercial (0°C to +70°C) and industrial (-40°C to +85°C) temperature versions available
- SOL, PLCC and 300 mil wide DIP packages available
Specifications
Source Content uid | SCC2691AE1A28 | Pbfree Code | Yes |
Part Life Cycle Code | Obsolete | Pin Count | 28 |
Reach Compliance Code | ECCN Code | EAR99 | |
HTS Code | 8542.31.00.01 | Address Bus Width | 3 |
Boundary Scan | NO | Clock Frequency-Max | 4 MHz |
Communication Protocol | ASYNC, BIT | Data Encoding/Decoding Method | NRZ |
Data Transfer Rate-Max | 0.0046875 MBps | External Data Bus Width | 8 |
JESD-30 Code | S-PQCC-J28 | JESD-609 Code | e3 |
Length | 11.505 mm | Low Power Mode | YES |
Moisture Sensitivity Level | 3 | Number of DMA Channels | |
Number of I/O Lines | 1 | Number of Serial I/Os | 1 |
Number of Terminals | 28 | On Chip Data RAM Width | |
Operating Temperature-Max | 85 °C | Operating Temperature-Min | -40 °C |
Peak Reflow Temperature (Cel) | 245 | Qualification Status | Not Qualified |
RAM (words) | 0 | Seated Height-Max | 4.57 mm |
Supply Current-Max | 2.5 mA | Supply Voltage-Max | 5.5 V |
Supply Voltage-Min | 4.5 V | Supply Voltage-Nom | 5 V |
Surface Mount | YES | Technology | CMOS |
Temperature Grade | INDUSTRIAL | Terminal Finish | Tin (Sn) |
Terminal Form | J BEND | Terminal Pitch | 1.27 mm |
Terminal Position | QUAD | Time@Peak Reflow Temperature-Max (s) | 30 |
Width | 11.505 mm | uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 6,881
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.