Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
4/0 Driver RS485 16-CDIP
16-CDIP(0.300",7.62mm)Manufacturer:
Texas Instruments
Mfr.Part #:
SN55LBC174J
Datasheet:
Type:
Driver
Protocol:
RS485
Number Of Drivers/Receivers:
4/0
Data Rate:
10Mbps
EDA/CAD Models:
Send all BOMs to
[email protected],
or fill out the form below for a quote on SN55LBC174J. Guaranteed response within
12hr.
Please fill in the short form below and we will provide you the quotation immediately.
The SN55LBC174 is composed of monolithic quadruple differential line drivers with 3-state outputs. This device is designed to meet the requirements of the Electronics Industry Association (EIA) Standard RS-485 and is optimized for balanced multipoint bus transmission at data rates up to and exceeding 10 million bits per second. Each driver features wide positive and negative common-mode output voltage ranges, current limiting, and thermal-shutdown protection making it suitable for party-line applications in noisy environments. This device is designed using LinBiCMOS, facilitating ultra-low power consumption and inherent robustness.
The SN55LBC174 provides positive and negative-current limiting and thermal shutdown for protection from line fault conditions on the transmission bus line. This device offers optimum performance when used with the SN55LBC173 quadruple line receiver. The SN55LBC174 is available in the 16-pin CDIP package (J), the 16-pin CPAK (W), or the 20-pin LCCC package (FK).
The SN55LBC174 is characterized for operation over the military temperature range of 55°C to 125°C.
Series | - | Type | Driver |
Protocol | RS485 | Number of Drivers/Receivers | 4/0 |
Duplex | - | Data Rate | 10Mbps |
Voltage - Supply | 4.75V ~ 5.25V | Operating Temperature | -55°C ~ 125°C (TA) |
Mounting Type | Through Hole |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $51.823 | $51.82 |
200+ | $20.056 | $4,011.20 |
500+ | $19.349 | $9,674.50 |
1000+ | $19.002 | $19,002.00 |
The prices below are for reference only.
CP2102
Silicon Laboratories
Integrate seamlessly into your design with our reliable interface I
MAX232
Texas Instruments
This V device features bps data transfer rates and robust ESD protection
W5500
Wiznet
With its comprehensive set of protocols and interfaces, this IC streamlines network development and deploymen
TJA1050
Nxp
Robust and reliable high-speed communication solution for demanding application
RTL2832U
Realtek
High-performance demodulation for DVB-T signals, plug-and-play via US