Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
Voltage level translator in an 8-pin SSOP package, available in tape and reel
SSOP-8Manufacturer:
Mfr.Part #:
SN74LVC2T45DCTR
Datasheet:
Series:
74LVC
Translator Type:
Voltage Level
Channel Type:
Bidirectional
Number Of Circuits:
1
EDA/CAD Models:
Please fill in the short form below and we will provide you the quotation immediately.
This dual-bit noninverting bus transceiver uses two separate configurable power-supplyrails. The A port is designed to track VCCA. VCCAaccepts any supply voltage from 1.65 V to 5.5 V. The B port is designed to trackVCCB. VCCB accepts any supply voltage from 1.65 V to5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.8-V,2.5-V, 3.3-V, and 5-V voltage nodes.
The SN74LVC2T45 is designed for asynchronous communication between two data buses. Thelogic levels of the direction-control (DIR) input activate either the B-port outputs or the A-portoutputs. The device transmits data from the A bus to the B bus when the B-port outputs areactivated, and from the B bus to the A bus when the A-port outputs are activated. The inputcircuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied toprevent excess ICC and ICCZ.
The SN74LVC2T45 is designed so that the DIR input circuit is supplied byVCCA. This device is fully specified for partial-power-down applicationsusing Ioff. The Ioff circuitry disables the outputs,preventing damaging current backflow through the device when it is powered down.
The VCC isolation feature ensures that if eitherVCC input is at GND, both ports are in the high-impedance state. NanoFreepackage technology is a major breakthrough in IC packaging concepts, using the die as thepackage.
Category | Integrated Circuits (ICs)LogicTranslators, Level Shifters | Series | 74LVC |
Translator Type | Voltage Level | Channel Type | Bidirectional |
Number of Circuits | 1 | Channels per Circuit | 2 |
Voltage - VCCA | 1.65 V ~ 5.5 V | Voltage - VCCB | 1.65 V ~ 5.5 V |
Input Signal | - | Output Signal | - |
Output Type | Tri-State, Non-Inverted | Data Rate | 420Mbps |
Operating Temperature | -40°C ~ 85°C (TA) | Features | - |
Mounting Type | Surface Mount | Base Product Number | 74LVC2T45 |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $0.478 | $0.48 |
10+ | $0.391 | $3.91 |
30+ | $0.347 | $10.41 |
100+ | $0.303 | $30.30 |
500+ | $0.276 | $138.00 |
1000+ | $0.263 | $263.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to
[email protected],
or fill below form to Quote for SN74LVC2T45DCTR, guaranteed quotes back within
12hr.
I write a review not immediately, as i tested the fee several times.The fee is excellent. Balancing works, but not immediately... It takes some time to align the cans (i have about 3 hours tried on it. I ordered 2 pcs-i will redo the battery screwdriver for lithium. Banks use sony vtc5a. In conjunction with this board, shurik turns like mad. The board itself disables charging upon reaching the banks of 12,6 v.There are the same boards cheaper, without balancing- http://ali . Pub/3gh4kb (remove space after point)Also tested them, work perfectly!I recommend this flux- http://ali . Pub/2upl7l (remove the gap after the point)Best flux on ali!!!