Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
Small-sized SOT23-6 package
SOT23-6Manufacturer:
Mfr.Part #:
TLV1805QDBVRQ1
Datasheet:
Series:
Automotive, AEC-Q100
Type:
General Purpose
Number Of Elements:
1
Output Type:
Push-Pull
EDA/CAD Models:
Send all BOMs to
[email protected],
or fill out the form below for a quote on TLV1805QDBVRQ1. Guaranteed response within
12hr.
Please fill in the short form below and we will provide you the quotation immediately.
The TLV1805-Q1 high voltage comparator offers the unique combination of wide supply range, push-pull output, rail-to-rail inputs, low quiescent current, shutdown capability and fast output response. All these features make this comparator well-suited for applications that require sensing at the positive or negative voltage rails such as reverse current protection for a smart diode controller, overcurrent sensing, and overvoltage protection circuits where the push-pull output stage is used to drive the gate of a p-channel or n-channel MOSFET switch.
The high peak current push-pull output stage, which is unique for high-voltage comparators, offers the advantage of allowing the output to actively drive the load to either supply rail with a fast edge rate. This is especially valuable in applications where a MOSFET gate needs to be driven high or low quickly in order to connect or disconnect a host from an unexpected high voltage supply. Additional features such as low input offset voltage, low input bias currents and High-Z shutdown make the TLV1805-Q1 flexible enough to handle a broad range of applications. Power-On reset prevents false outputs at power-up.
The TLV1805-Q1 is AEC-Q100 qualified in a 6-pin SOT-23 package and is specified for operation across the automotive Grade 1 temperature range of –40°C to +125°C.
Category | Integrated Circuits (ICs)LinearComparators | Series | Automotive, AEC-Q100 |
Type | General Purpose | Number of Elements | 1 |
Output Type | Push-Pull | Voltage - Supply, Single/Dual (±) | 3.3V ~ 40V, ±1.65V ~ 20V |
Voltage - Input Offset (Max) | 4.5mV @ 40V | Current - Input Bias (Max) | 500pA |
Current - Output (Typ) | 85mA @ 40V | Current - Quiescent (Max) | 150µA |
CMRR, PSRR (Typ) | 60dB CMRR, 70dB PSRR | Propagation Delay (Max) | 250ns (Typ) |
Hysteresis | 15mV | Operating Temperature | -40°C ~ 125°C (TA) |
Mounting Type | Surface Mount | Base Product Number | TLV1805 |
Number of channels | 1 | Output type | Push-Pull |
Propagation delay time (µs) | 0.25 | Vs (max) (V) | 40 |
Vs (min) (V) | 3.3 | Vos (offset voltage at 25°C) (max) (mV) | 4.5 |
Iq per channel (typ) (mA) | 0.15 | Input bias current (±) (max) (nA) | 0.5 |
Rail-to-rail | In | Rating | Automotive |
Operating temperature range (°C) | -40 to 125 | Features | Hysteresis, Shutdown |
VICR (max) (V) | 0 | VICR (min) (V) | 0 |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $0.879 | $0.88 |
10+ | $0.720 | $7.20 |
30+ | $0.641 | $19.23 |
100+ | $0.562 | $56.20 |
500+ | $0.515 | $257.50 |
1000+ | $0.489 | $489.00 |
The prices below are for reference only.
OPA2134PA
Texas Instruments
100+ $9.060
TL072CP
Texas Instruments
1000+ $0.238
UA741CP
Texas Instruments
5000+ $0.155
LM358P
Texas Instruments
20nA Dual 700kHz DIP-8 Operational Amplifier ROHS
TL082CP
Texas Instruments
Dual operational amplifier with a 30-volt voltage range and 3-megahertz bandwidth
it has 45lm max also inside single chip with single thin wire we can't compare to brand LEDs