Payment Method
TMAG5111A2AQDBVT +BOM
Digital Switch Latch Open Drain Hall Effect SOT-23-5
SOT-23-5-
Manufacturer:
Texas Instruments
-
Mfr.Part #:
TMAG5111A2AQDBVT
-
Datasheet:
-
Type:
2D Dual Latch
-
Operating Supply Current:
6 mA
-
Maximum Output Current:
10 mA
-
Operating Point Min/Max:
0.2 mT to 2.6 mT
-
EDA/CAD Models:
Send all BOMs to [email protected], or fill out the form below for a quote on TMAG5111A2AQDBVT. Guaranteed response within 12hr.
Availability: 7075 PCS
Please fill in the short form below and we will provide you the quotation immediately.
TMAG5111A2AQDBVT General Description
The TMAG5110 and TMAG5111 are 2-dimensional, dual Hall-effect latches operating from a 2.5 V to 38 V power supply. Designed for high-speed and high-temperature motor applications, these devices are optimized for applications leveraging rotating magnets. Integrating two sensors and two separate signal chains the TMAG511x offers two independent digital outputs giving speed and direction calculation (TMAG5111) or giving directly the digital output of each independent latches (TMAG5110). This high level of integration allow the use of a single TMAG511x device instead of two separate latches.
The device is offered in a standard 3 mT operating point, as well as a high-sensitivity 1.4 mT operating point. The higher magnetic sensitivity provides flexibility in low-cost magnet selection and mechanical component placement. The TMAG511x is also available in three 2-axis combination options (X-Y, Z-X, Z-Y) to allow flexible placement of the sensor relative to the magnet.
The device performs consistently across a wide ambient temperature range of –40 °C to +125 °C.
Key Features
- 2D sensing with planar and vertical hall sensors
- Inherent quadrature independent of magnet alignment or magnet pole pitch
- Two functional options available:
- TMAG5110: independent 2D outputs
- TMAG5111: speed and direction outputs
- Ultra-high magnetic sensitivity:
- TMAG511xx2: ±1.4 mT (typical)
- TMAG511xx4: ±3 mT (typical)
- Fast 40-kHz sensing bandwidth
- 2.5-V to 38-V operating VCC range
- Open-drain output (10 mA sink)
- Wide ambient operating temperature range:
- –40 °C to +125 °C
- Protection features
- Reverse supply protection (up to –20 V)
- Device survives up to 40-V
- Output short-circuit protection
- Output current limitation
Specifications
Product Category | Board Mount Hall Effect / Magnetic Sensors | Type | 2D Dual Latch |
Operating Supply Current | 6 mA | Maximum Output Current | 10 mA |
Operating Point Min/Max | 0.2 mT to 2.6 mT | Release Point Min/Max (Brp) | - 0.2 mT to - 2.6 mT |
Operating Supply Voltage | 2.5 V to 38 V | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 125 C | Mounting Style | SMD/SMT |
Series | TMAG5111 | Moisture Sensitive | Yes |
Output Type | Open Drain | Output Voltage | 38 V |
Product | Hall Effect Latches | Product Type | Hall Effect / Magnetic Sensors |
Sensitivity | 1.4 mT | Factory Pack Quantity | 250 |
Subcategory | Sensors | Supply Voltage - Max | 38 V |
Supply Voltage - Min | 2.5 V | Termination Style | SMD/SMT |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 7,075
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $1.617 | $1.62 |
250+ | $0.625 | $156.25 |
500+ | $0.604 | $302.00 |
1000+ | $0.593 | $593.00 |
The prices below are for reference only.