Payment Method
TMC8462-BA +BOM
Product TMC8462-BA is an EtherCAT slave controller
AN-
Manufacturer:
-
Mfr.Part #:
TMC8462-BA
-
Datasheet:
-
Series:
EtherCAT®
-
Programmable:
Not Verified
-
Protocol:
Ethernet
-
Function:
Controller
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for TMC8462-BA, guaranteed quotes back within 12hr.
Availability: 7170 PCS
Please fill in the short form below and we will provide you the quotation immediately.
TMC8462-BA General Description
Ethernet Controller SPI Interface 121-BGA (9x9)
Key Features
- Standard compliant EtherCAT slave controller
- 8 High Voltage I/Os (up to 35V, 100mA)
- 2x switching regulator for system supply
- Multifunction block comprises Watchdog, 4 PWM outputs and Step/Dir generator
- 2 integrated 100Mbit Ethernet PHYs
Specifications
Category | Integrated Circuits (ICs)InterfaceControllers | Series | EtherCAT® |
Programmable | Not Verified | Protocol | Ethernet |
Function | Controller | Interface | SPI |
Standards | - | Voltage - Supply | 3.15V ~ 3.45V, 4.75V ~ 34V |
Current - Supply | - | Operating Temperature | -40°C ~ 125°C (TJ) |
Base Product Number | TMC8462 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 7,170
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
Of the 3 modules ordered, one did not earn. A little later it turned out that the other two work with failures. The problem was in poor contacts between the display itself and the board. At the top of the module there is a contact pad that connects the board to the display, there is received contact, because. Between the board and the display is a small backlash. Solving the problem is simple: received the two upper ear-latches by pressing the board to the display. After that, all three modules work stably.