Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
1-Bit Bidirectional Voltage-Level Shifter With Auto Direction Sensing and +/-15-kV ESD Protect
SOT23Manufacturer:
Mfr.Part #:
TXB0101DBVR
Datasheet:
Technology Family:
TXB
Bits (#):
1
Data Rate (max) (MBps):
100
High Input Voltage (min) (V):
0.78
EDA/CAD Models:
Send all BOMs to
[email protected],
or fill out the form below for a quote on TXB0101DBVR. Guaranteed response within
12hr.
Please fill in the short form below and we will provide you the quotation immediately.
This 1-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package.
Technology family | TXB | Bits (#) | 1 |
Data rate (max) (MBps) | 100 | High input voltage (min) (V) | 0.78 |
High input voltage (max) (V) | 5.5 | Vout (min) (V) | 1.2 |
Vout (max) (V) | 5.5 | IOH (max) (mA) | -0.02 |
IOL (max) (mA) | 0.02 | Supply current (max) (µA) | 8 |
Features | Edge rate accelerator, Integrated pullup resistors, Output enable, Partial power down (Ioff), Vcc isolation | Input type | Standard CMOS |
Output type | 3-State, CMOS, Push-Pull | Rating | Catalog |
Operating temperature range (°C) | -40 to 85 | feature-logic-family | TXB |
feature-logic-function | Voltage Level Translator | feature-translation | |
feature-process-technology | feature-output-type | 3-State|Push-Pull | |
feature-maximum-low-level-output-current-ma | 0.02 | feature-maximum-high-level-output-current-ma | -0.02 |
feature-minimum-operating-supply-voltage-v | 1.2/1.65 | feature-maximum-operating-supply-voltage-v | 3.6/5.5 |
feature-packaging | Tape and Reel | feature-rad-hard | No |
feature-pin-count | 6 | feature-cecc-qualified | No |
feature-esd-protection | Yes | feature-military | No |
feature-aec-qualified | No | feature-aec-qualified-number | |
feature-auto-motive | No | feature-p-pap | No |
feature-eccn-code | EAR99 | feature-svhc | Yes |
feature-svhc-exceeds-threshold | No |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $0.416 | $0.42 |
10+ | $0.340 | $3.40 |
30+ | $0.306 | $9.18 |
100+ | $0.265 | $26.50 |
500+ | $0.223 | $111.50 |
1000+ | $0.212 | $212.00 |
The prices below are for reference only.
Kudos to Avaq for their commitment to quality! The LPC47M107S-MS components I purchased were flawless, confirming Avaq's dedication to providing genuine and faultless electronic devices. Highly recommended!