This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

W25Q32JVTCIQ +BOM

Uniform 4KB sectors

  • Manufacturer:

    WINBOND ELECTRONICS CORP

  • Mfr.Part #:

    W25Q32JVTCIQ

  • Datasheet:

    W25Q32JVTCIQ Datasheet (PDF) pdf-icon

  • Pbfree Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Reach Compliance Code:

    compliant

  • ECCN Code:

    EAR99

W25Q32JVTCIQ General Description

The W25Q32JVTCIQ, produced by Winbond, is a remarkable addition to the W25Q-JV series. Its 32 megabits of storage capacity, equipped with a Quad SPI interface for faster data transfer rates, make it a versatile choice for a wide range of applications. With a voltage range of 2.7V to 3.6V, this flash memory chip ensures compatibility and reliability across various devices. Its flexible architecture, supporting both standard SPI commands and Quad SPI commands, offers enhanced performance and security features. The inclusion of hardware-based protection for critical data and a unique factory-programmed 64-bit serial number further solidifies its appeal in the consumer electronics, industrial, automotive, and communication sectors. The W25Q32JVTCIQ's small form factor and low power consumption make it an ideal solution for non-volatile storage needs in firmware, configuration data, and other essential information

Key Features

  • New Family of SpiFlash Memories
  • – W25Q32JV: 32M-bit / 4M-byte
  • – Standard SPI: CLK, /CS, DI, DO
  • – Dual SPI: CLK, /CS, IO0, IO1
  • – Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
  • – Software & Hardware Reset(1)
  • Highest Performance Serial Flash
  • – 133MHz Single, Dual/Quad SPI clocks
  • – 266/532MHz equivalent Dual/Quad SPI
  • – 66MB/S continuous data transfer rate
  • – Min. 100K Program-Erase cycles per sector
  • – More than 20-year data retention
  • Efficient “Continuous Read”
  • – Continuous Read with 8/16/32/64-Byte Wrap
  • – As few as 8 clocks to address memory
  • – Allows true XIP (execute in place) operation
  • – Outperforms X16 Parallel Flash
  • Low Power, Wide Temperature Range
  • – Single 2.7V to 3.6V supply
  • – <1µA Power-down (typ.)
  • – -40°C to +85°C operating range
  • Flexible Architecture with 4KB sectors
  • – Uniform Sector/Block Erase (4K/32K/64K-Byte)
  • – Program 1 to 256 byte per programmable page
  • – Erase/Program Suspend & Resume
  • Advanced Security Features
  • – Software and Hardware Write-Protect
  • – Special OTP protection(2)
  • – Top/Bottom, Complement array protection
  • – Individual Block/Sector array protection
  • – 64-Bit Unique ID for each device
  • – Discoverable Parameters (SFDP) Register
  • – 3X256-Bytes Security Registers
  • – Volatile & Non-volatile Status Register Bits
  • Space Efficient Packaging
  • – 8-pin SOIC/VSOP 208-mil
  • – 8-pad WSON 6x5-mm, XSON 4x4-mm
  • – 16-pin SOIC 300-mil
  • – 8-pin PDIP 300-mil
  • – 24-ball TFBGA 8x6-mm (6x4 ball array)
  • – 24-ball TFBGA 8x6-mm (6x4/5x5 ball array)
  • – Contact Winbond for KGD and other options

Specifications

Pbfree Code Yes Part Life Cycle Code Active
Reach Compliance Code compliant ECCN Code EAR99
HTS Code 8542.32.00.51 Additional Feature 2.7V NOMINAL AVAILABLE WITH 104MHZ
Alternate Memory Width 1 Clock Frequency-Max (fCLK) 133 MHz
JESD-30 Code R-PBGA-B24 JESD-609 Code e1
Length 8 mm Memory Density 33554432 bit
Memory IC Type FLASH Memory Width 8
Number of Functions 1 Number of Terminals 24
Number of Words 4194304 words Number of Words Code 4000000
Operating Mode SYNCHRONOUS Operating Temperature-Max 85 °C
Operating Temperature-Min -40 °C Organization 4MX8
Parallel/Serial SERIAL Peak Reflow Temperature (Cel) 260
Programming Voltage 3 V Seated Height-Max 1.2 mm
Supply Voltage-Max (Vsup) 3.6 V Supply Voltage-Min (Vsup) 3 V
Supply Voltage-Nom (Vsup) 3.3 V Surface Mount YES
Technology CMOS Temperature Grade INDUSTRIAL
Terminal Finish TIN SILVER COPPER Terminal Form BALL
Terminal Pitch 1 mm Terminal Position BOTTOM
Width 6 mm Product Category NOR Flash
Mounting Style SMD/SMT Series W25Q32JV
Memory Size 32 Mbit Supply Voltage - Min 2.7 V
Supply Voltage - Max 3.6 V Active Read Current - Max 25 mA
Interface Type SPI Maximum Clock Frequency 133 MHz
Data Bus Width 8 bit Timing Type Synchronous
Minimum Operating Temperature - 40 C Maximum Operating Temperature + 85 C
Moisture Sensitive Yes Product Type NOR Flash
Factory Pack Quantity 960 Subcategory Memory & Data Storage
Tradename SpiFlash

Service Policies and Others

After-Sales & Settlement Related

payment Payment

Payment Method

hsbc
TT/Wire Transfer
paypal
Paypal
wu
Western Union
mg
Money Gram

For alternative payment channels, please reach out to us at:

[email protected]
shipping Shipping & Packing

Shipping Method

fedex
Fedex
ups
UPS
dhl
DHL
tnt
NTN
Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty Warranty

We promise to provide 365 days quality assurance service for all our products.

Reviews

You need to log in to reply. Sign In | Sign Up