Payment Method
W25Q80BVSSAG +BOM
AEC-Q100 Dual SPI 3V/3.3V
8-SOIC(0.209",5.30mmWidth)-
Manufacturer:
Winbond Electronics
-
Mfr.Part #:
W25Q80BVSSAG
-
Datasheet:
-
Series:
SpiFlash®
-
Programmabe:
Not Verified
-
Memory Type:
Non-Volatile
-
Memory Format:
FLASH
-
EDA/CAD Models:
Send all BOMs to [email protected], or fill out the form below for a quote on W25Q80BVSSAG. Guaranteed response within 12hr.
Availability: 5173 PCS
Please fill in the short form below and we will provide you the quotation immediately.
W25Q80BVSSAG General Description
The W25Q80BVSSAG from Winbond is a high-performance 8M-bit serial flash memory chip that combines fast read and write speeds with advanced security features. Its low power consumption and deep power-down mode make it an energy-efficient solution for applications where power efficiency is crucial. With its wide voltage range and support for SPI and QSPI interfaces, it offers flexibility in system integration. Whether used in consumer electronics, automotive, industrial, or networking applications, the W25Q80BVSSAG delivers reliable and secure data storage
Key Features
- Family of SpiFlash Memories
- – W25Q80BV: 8M-bit/1M-byte (1,048,576)
- – 256-byte per programmable page
- – Standard SPI: CLK, /CS, DI, DO, /WP, /Hold
- – Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold
- – Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
- Highest Performance Serial Flash
- – 104MHz Dual/Quad SPI clocks
- – 208/416MHz equivalent Dual/Quad SPI
- – 50MB/S continuous data transfer rate
- – Up to 8X that of ordinary Serial Flash
- – More than 100,000 erase/program cycles(1)
- – More than 20-year data retention
- Efficient “Continuous Read Mode”
- – Low Instruction overhead
- – Continuous Read with 8/16/32/64-Byte Wrap
- – As few as 8 clocks to address memory
- – Allows true XIP (execute in place) operation
- – Outperforms X16 Parallel Flash
- Low Power, Wide Temperature Range
- – Single 2.7 to 3.6V supply
- – 4mA active current, <1µA Power-down current
- – -40°C to +85°C operating range
- Flexible Architecture with 4KB sectors
- – Uniform Sector Erase (4K-bytes)
- – Uniform Block Erase (32K and 64K-bytes)
- – Program one to 256 bytes
- – Erase/Program Suspend & Resume
- Advanced Security Features
- – Software and Hardware Write-Protect
- – Top/Bottom, 4KB complement array protection
- – Lock-Down and OTP array protection
- – 64-Bit Unique Serial Number for each device
- – Discoverable Parameters (SFDP) Register
- – 3X256-Byte Security Registers with OTP locks
- – Volatile & Non-volatile Status Register Bits
- Space Efficient Packaging
- – 8-pin SOIC 150(2)/208-mil
- – 8-pad WSON 6x5-mm
- – 8-pin PDIP 300-mil
- – Contact Winbond for KGD and other options
Specifications
Series | SpiFlash® | Programmabe | Not Verified |
Memory Type | Non-Volatile | Memory Format | FLASH |
Technology | FLASH - NOR | Memory Size | 8Mbit |
Memory Organization | 1M x 8 | Memory Interface | SPI - Quad I/O |
Clock Frequency | 104 MHz | Write Cycle Time - Word, Page | 50µs, 3ms |
Access Time | 6 ns | Voltage - Supply | 2.5V ~ 3.6V |
Operating Temperature | -40°C ~ 105°C (TA) | Mounting Type | Surface Mount |
Base Product Number | W25Q80 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 5,173
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.