Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
XC17S200APDG8C FPGA Configuration Memory
DIP8Manufacturer:
Mfr.Part #:
XC17S200APDG8C
Datasheet:
Memory Type:
EEPROM
Memory Size:
2 Mbit
Operating Supply Voltage:
3.3 V
Minimum Operating Temperature:
0 C
EDA/CAD Models:
Send all BOMs to
[email protected],
or fill out the form below for a quote on XC17S200APDG8C. Guaranteed response within
12hr.
Please fill in the short form below and we will provide you the quotation immediately.
The Spartan family of PROMs provides an easy-to-use, cost-effective method for storing Spartan device configuration bitstreams.
When the Spartan device is in Master Serial mode, it generates a configuration clock that drives the Spartan FPGA PROM. A short access time after the rising clock edge, data appears on the PROM DATA output pin that is connected to the Spartan device DIN pin. The Spartan device generates the appropriate number of clock pulses to complete the configuration. Once configured, it disables the PROM. When a Spartan device is in Slave Serial mode, the PROM and the Spartan device must both be clocked by an incoming signal.
For device programming, either the Xilinx Alliance or the Foundation series development systems compiles the Spartan device design file into a standard HEX format which is then transferred to most commercial PROM programmers.
Product Category: | FPGA - Configuration Memory | Memory Type: | EEPROM |
Memory Size: | 2 Mbit | Operating Supply Voltage: | 3.3 V |
Minimum Operating Temperature: | 0 C | Maximum Operating Temperature: | + 70 C |
Mounting Style: | Through Hole | Moisture Sensitive: | Yes |
Operating Supply Current: | 15 mA | Product Type: | FPGA - Configuration Memory |
Series: | XC17S200A | Factory Pack Quantity: | 1 |
Subcategory: | Programmable Logic ICs | Supply Voltage - Max: | 3.6 V |
Supply Voltage - Min: | 3 V |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
The module arrived quickly, but in the description of not a word that the module is programmed through an additional ftdi controller. Without it (controller) even to check the performance is not possible. In addition, in the description of not a word about what the board is called ai-thinker module, although i'm not sure, because. On the esp case there is no marking.