This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

CC1101RGPR

Low-power Sub-1 GHz wireless transceiver

Manufacturer:

TI
Mfr.Part #:

CC1101RGPR
Datasheet:

CC1101RGPR Datasheet (PDF)
Series:

CC1101
Frequency Range:

315MHz to 928MHz
Sensitivity:

-110dBm
Modulation Format:

FSK, GFSK, MSK, GMSK, OOK
EDA/CAD Models:

Request Free CAD Models for CC1101RGPR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

CC1101RGPR General Description

CC1101 is a low-cost sub-1 GHz transceiver designed for very low-power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868, and 915 MHz, but can easily be programmed for operation at other frequencies in the 300-348 MHz, 387-464 MHz and 779-928 MHz bands.

The RF transceiver is integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up to 600 kbps.

CC1101 provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio.

The main operating parameters and the 64- byte transmit/receive FIFOs of CC1101 can be controlled via an SPI interface. In a typical system, the CC1101 will be used together with a microcontroller and a few additional passive components.

The CC1190 850-950 MHz range extender [21] can be used with CC1101 in long range applications for improved sensitivity and higher output power.

Key Features

RF Performance
- High sensitivity
  - –116 dBm at 0.6 kBaud, 433 MHz, 1% packet error rate
  - –112 dBm at 1.2 kBaud, 868 MHz, 1% packet error rate
- Low current consumption (14.7 mA in RX, 1.2 kBaud, 868 MHz)
- Programmable output power up to +12 dBm for all supported frequencies
- Excellent receiver selectivity and blocking performance
- Programmable data rate from 0.6 to 600 kbps
- Frequency bands: 300-348 MHz, 387-464 MHz and 779-928 MHz
Analog Features
- 2-FSK, 4-FSK, GFSK, and MSK supported as well as OOK
  and flexible ASK shaping
- Suitable for frequency hopping systems due to a fast settling
  frequency synthesizer; 75 µs settling time
- Automatic Frequency Compensation (AFC) can be used to align the frequency
  synthesizer to the received signal centre frequency
- Integrated analog temperature sensor
Digital Features
- Flexible support for packet oriented systems; On-chip support for
  sync word detection, address check, flexible packet length, and
  automatic CRC handling
- Efficient SPI interface; All registers can be programmed with
  one "burst" transfer
- Digital RSSI output
- Programmable channel filter bandwidth
- Programmable Carrier Sense (CS) indicator
- Programmable Preamble Quality Indicator (PQI) for improved protection
  against false sync word detection in random noise
- Support for automatic Clear Channel Assessment (CCA) before transmitting
  (for listen-before-talk systems)
- Support for per-package Link Quality Indication (LQI)
- Optional automatic whitening and de-whitening of data
Low-Power Features
- 200 nA sleep mode current consumption
- Fast startup time; 240 µs from sleep to RX or TX
  mode (measured on EM reference design [1] and [2])
- Wake-on-radio functionality for automatic low-power RX polling
- Separate 64-byte RX and TX data FIFOs (enables burst mode data transmission)
General
- Few external components; Completely on-chip frequency synthesizer, no external
  filters or RF switch needed
- Green package: RoHS compliant and no antimony or bromine
- Small size (QLP 4x4 mm package, 20 pins)
- Suited for systems targeting compliance with EN 300 220 (Europe) and
  FCC CFR Part 15 (US)
- Suited for systems targeting compliance with the Wireless MBUS standard EN 13757-4:2005
- Support for asynchronous and synchronous serial receive/transmit mode for backwards
  compatibility with existing radio communication protocols
Improved Range using CC1190
- The CC1190 [21] is a range extender for 850-950 MHz and is an ideal
  fit for CC1101 to enhance RF performance
- High sensitivity–118 dBm at 1.2 kBaud, 868 MHz, 1% packet error
  rate–120 dBm at 1.2 kBaud, 915 MHz, 1% packet error rate
- +20 dBm output power at 868 MHz
- +27 dBm output power at 915 MHz
- Refer to AN094 [22] and AN096 [23] for more performance figures of the
  CC1101 + CC1190 combination
Reduced Battery Current using TPS62730
- The TPS62730 [26] is a step down converter with bypass mode for
  ultra low power wireless applications
- In RX, the current drawn from a 3.6 V battery is typically less than
  11 mA when TPS62730 output voltage is 2.1 V. When connecting CC1101
  directly to a 3.6 V battery the current drawn is typically 17 mA
- In TX, at maximum output power (+12 dBm), the current drawn from a
  3.6 V battery is typically 22 mA when TPS62730 output voltage is 2.1 V.
  When connecting CC1101 directly to a 3.6 V battery the current drawn is
  typically 34 mA
- When CC1101 enters SLEEP mode, the TPS62730 can be put
  in bypass mode for very low power down current
- The typical TPS62730 current consumption is 30 nA in bypass mode.
- The CC1101 is connected to the battery via an integrated 2.1 Ω (typical)
  switch in bypass mode

Application

Wireless
Industrial
Medical

Specifications

Product Name	CC1101RGPR	Product Type	Transceiver
Series	CC1101	Frequency Range	315MHz to 928MHz
Sensitivity	-110dBm	Modulation Format	FSK, GFSK, MSK, GMSK, OOK
Maximum Output Power	10dBm	Data Rate	Up to 600kbps
Supply Voltage	1.8V to 3.6V	Operating Temperature	-40°C to 85°C
Product Category	RF Transceiver	Type	Sub-GHz
Maximum Data Rate	500 kbps	Supply Voltage - Min	1.8 V
Supply Voltage - Max	3.6 V	Supply Current Receiving	14 mA
Output Power	12 dBm	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Interface Type	SPI
Maximum Operating Frequency	348 MHz, 464 MHz, 928 MHz	Moisture Sensitive	Yes
Mounting Style	SMD/SMT	Number of Receivers	1
Number of Transmitters	1	Operating Supply Voltage	1.8 V to 3.6 V
Factory Pack Quantity	3000	Subcategory	Wireless & RF Integrated Circuits
Technology	Si	Unit Weight	0.002469 oz

Service Policies and Others

After-Sales & Settlement Related

Payment

Payment Method

TT/Wire Transfer

Paypal

Western Union

Money Gram

For alternative payment channels, please reach out to us at:

[email protected]

Shipping & Packing

Shipping Method

Fedex

UPS

DHL

NTN

Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty

365-Day Product

Quality Guarantee

We promise to provide 365 days quality assurance service for all our products.

Ratings and Reviews

T**a 09/30/2023

Avaq's delivery speed was remarkable! The CC1101RGPR components were at my doorstep sooner than expected, allowing me to proceed with my project without any delays. Impressive!

M**y 05/21/2023

I am thrilled with the prompt and reliable delivery service provided by Avaq. The CC1101RGPR components arrived in excellent condition and were securely packaged. Fantastic experience!

E**o 02/05/2023

Avaq stands out with their unbeatable customer service! From lightning-fast responses to their genuine assistance, I felt valued throughout my purchase of the CC1101RGPR components. Highly recommended!

J**y 01/18/2023

Great job, Avaq! The brand new CC1101RGPR components I received were faultless - they lived up to their reputation for top-notch quality. Such a reliable distributor!