This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

82P33741BAG +BOM

Clock Synthesizer / Jitter Cleaner Port Synchronizer IEEE 1588

Manufacturer:

Renesas Electronics
Mfr.Part #:

82P33741BAG
Datasheet:

82P33741BAG Datasheet (PDF)
Series:

82P33741
Height:

1.53 mm
Length:

13 mm
Moisture Sensitive:

Yes

82P33741BAG General Description

The 82P33741 Port Synchronizer is a cutting-edge solution for managing timing references in IEEE 1588 and Synchronous Ethernet environments. With support for up to three independent timing paths, this device offers unparalleled flexibility for clock generation and frequency translation. Whether you need to synchronize 40GBASE-R, 10GBASE-R, or lower-rate Ethernet interfaces, the 82P33741 delivers low-jitter clocks with precision timing. Additionally, it is compatible with CPRI/OBSAI, SONET/SDH, and PDH interfaces, making it a versatile choice for a wide range of applications. Make the most of your network's timing requirements with the 82P33741 Port Synchronizer

Key Features

Supports 3 independent timing paths: IEEE 1588, physical layer (SyncE, SONET/SDH, PDH, CPRI/OBSAI) and recovered line clock
Phase synchronizes IEEE 1588 TSUs (Time Stamp Units) at network ports with redundant system-wide IEEE 1588 clock and sync pulse pairs: 1PPS (Pulse Per Second) sync pulses
Precise 1PPS edge alignment is supported with programmable input-to-input, input-to-output and output-to-output phase delays: sub-ns resolution
Frequency synchronizes physical layer ports with redundant system-wide frequency references
Generates clocks for: 10GBASE-R, 10GBASE-W, 40GBASE-R and CPRI/OBSAI interfaces without external jitter attenuators: jitter generation <0.3 ps RMS (10 kHz to 20 MHz)
Generates clocks for: Ethernet, SONET/SDH and PDH interfaces: jitter generation <1 ps RMS (12 kHz to 20 MHz)
Prevents time errors and PHY bit errors with automatic reference switching, optional hitless reference switching and revertive or non-revertive reference switching
DPLLs lock to a wide range of reference clock frequencies including: 10/100/1000 Ethernet, 10G Ethernet, OTN, SONET/SDH, PDH, TDM, GSM, CPRI/OBSAI and GNSS frequencies using fractional-N input dividers
Automatically loads configuration from an external EPROM after reset without processor intervention
144 pin CABGA package

Specifications

Product Category	Clock Synthesizer / Jitter Cleaner	Series	82P33741
Height	1.53 mm	Length	13 mm
Moisture Sensitive	Yes	Product Type	Clock Synthesizers / Jitter Cleaners
Factory Pack Quantity	168	Subcategory	Clock & Timer ICs
Width	13 mm