This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

BLUENRG-M2SP +BOM

Very low power application processor module for Bluetooth® low energy v5.2

Manufacturer:

STMicroelectronics, Inc
Mfr.Part #:

BLUENRG-M2SP
Datasheet:

BLUENRG-M2SP Datasheet (PDF)
Series:

BlueNRG
Programmable:

Not Verified
RF Family/Standard:

Bluetooth
Protocol:

Bluetooth v5.0
EDA/CAD Models:

Request Free CAD Models for BLUENRG-M2SP

BLUENRG-M2SP General Description

The BlueNRG-M2 is a Bluetooth® low energy system-on-chip application processor certified module, compliant with BT specifications v5.2 and BQE qualified. The BlueNRG-M2 module supports multiple roles simultaneously and can act at the same time as Bluetooth master and slave device. The BlueNRG-M2 is based on the BlueNRG-2 system-on-chip and entire Bluetooth low energy stack and protocols are embedded into module. The BlueNRG-M2 module provides a complete RF platform in a tiny form factor. Radio, embedded antenna and high frequency oscillators are integrated to offer a certified solution to optimize the time-to-market of the final applications. The BlueNRG-M2 can be powered directly with a pair of AAA batteries or any power source from 1.7 to 3.6 V.STWIN SensorTile Wireless Industrial Node develo.Evaluation platform based on the BlueNRG-M2SA mo.Bluetooth Low Energy expansion board based on th.

Key Features

Bluetooth v5.2 certified
- Supports master and slave modes
- Multiple roles supported simultaneously
- LE data packet length extension
Embedded ST BlueNRG-2 BLE SoC
- High performance, ultra-low power Cortex-M0 32-bit based core
- Programmable embedded 256 kB Flash
- 24 kB embedded RAM with data retention
- Up to +8 dBm available output power
- Down to -88 dBm Rx sensitivity
- Up to 96 dB link budget with excellent link reliability
Embedded BALF-NRG-02D3 integrated matched balun with harmonic filter
Interfaces
- 1 x UART, 1 x I2C, 1xSPI, 14 x GPIO, 2 x multifunction timer, 10-bit ADC, watchdog and RTC, DMA controller, PDM stream processor, SWD debug interface
On-board chip antenna (BLUENRG-M2SA) or PCB antenna (BLUENRG-M2SP)
Small form factor: 11.5 mm x13.5 mm
Complemented with Bluetooth low energy protocol stack library (GAP, GATT,SM, L2CAP, LL)
AES security co-processor
Bluetooth low energy SDK with a wide range of available profiles
Certification
- CE qualified
- FCC, IC modular approval certified
- TYPE qualified
- BQE qualified
- WPC certification
- SRRC certification(BlueNRG-M2SA)
Pre-programmed UART bootloader
Operating supply voltage: from 1.7 to 3.6 V
Operating temperature range: -40 °C to 85 °C

Specifications

Category	RF and WirelessRF Transceiver Modules and Modems	Series	BlueNRG
Programmable	Not Verified	RF Family/Standard	Bluetooth
Protocol	Bluetooth v5.0	Modulation	-
Frequency	2.4GHz ~ 2.4835GHz	Data Rate	-
Power - Output	7dbm	Sensitivity	-85dBm
Serial Interfaces	ADC, GPIO, I²C, SPI, UART	Antenna Type	PCB Trace
Utilized IC / Part	BlueNRG-2	Memory Size	256kB Flash, 24kB RAM
Voltage - Supply	1.7V ~ 3.6V	Current - Receiving	15mA
Current - Transmitting	13.7mA ~ 33.9mA	Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 85°C (TA)	Base Product Number	BLUENRG
feature-packaging	Tape and Reel	feature-pin-count	20
feature-cecc-qualified		feature-esd-protection	Yes
feature-military	No	feature-aec-qualified	No
feature-aec-qualified-number		feature-auto-motive	No
feature-p-pap	No	feature-eccn-code	5A992c.
feature-svhc		feature-svhc-exceeds-threshold	No