This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TDA8004T/C1 +BOM

Combining exceptional audio with energy efficiency, TDA8004T/C1 is an ideal choice for mobile applications

■3 V or 5 V supply for the IC (GND and VDD)

■ Step-up converter for VCC generation (separately powered with a 5 V ± 10 % supply,

VDDP and PGND)

■ 3 specific protected half duplex bidirectional buffered I/O lines (C4, C7 and C8)

■ VCC regulation 5 V ± 5 % on 2 × 100 nF or 1 × 100 nF and 1 × 220 nF multilayer

ceramic capacitors with low Equivalent Series Resistance (ESR), ICC < 65 mA at

4.5 V < VDDP < 6.5 V, current spikes of 40 nAs up to 20 MHz, with controlled rise and

fall times, filtered overload detection approximately 90 mA)

■ Thermal and short-circuit protections on all card contacts

■ Automatic activation and deactivation sequences (initiated by software or by hardware

in the event of a short-circuit, card take-off, overheating or supply drop-out)

■ Enhanced ElectroStatic Discharge (ESD) protection on card side (> 6 kV)

■ 26 MHz integrated crystal oscillator

■ Clock generation for the card up to 20 MHz (divided by 1, 2, 4 or 8 through CLKDIV1

and CLKDIV2 signals)

■ Non-inverted control of RST via pin RSTIN

■ ISO 7816, GSM11.11 and EMV (payment systems) compatibility

■ Supply supervisor for spikes killing during power-on and power-off

■ One multiplexed status signal OFF

■ IC card readers for banking

■ Electronic payment

■ Identification

■ Pay TV

Supply Voltage	4.75V ~ 5.25V	Operating Temperature	-40°C ~ 105°C
Mounting Type	Surface Mount	Packaging	Tube
Function	Speaker Amplifier	Output Type	1-Channel Mono
Max Output Power x Channels @ Load	3.2W x 1 @ 8 Ohm	Voltage - Supply	4.5V ~ 5.5V