Payment Method
TPS51200QDRCRQ1 +BOM
Automotive Catalog Sink/Source DDR Termination Regulator
SON-10-
Manufacturer:
-
Mfr.Part #:
TPS51200QDRCRQ1
-
Datasheet:
-
Series:
Automotive, AEC-Q100
-
Applications:
Converter, DDR
-
Voltage - Input:
2.38V ~ 3.5V
-
Number Of Outputs:
1
-
EDA/CAD Models:
Send all BOMs to [email protected], or fill out the form below for a quote on TPS51200QDRCRQ1. Guaranteed response within 12hr.
Availability: 3269 PCS
Please fill in the short form below and we will provide you the quotation immediately.
TPS51200QDRCRQ1 General Description
The TPS51200-Q1 device is a sink and source double-data-rate (DDR) termination regulator specifically designed for low input voltage, low-cost, low-noise systems where space is a key consideration.
The TPS51200-Q1 device maintains a fast transient response and only requires a minimum output capacitance of 20 μF. The TPS51200-Q1 device supports a remote sensing function and all power requirements for DDR, DDR2, DDR3, DDR3L, Low Power DDR3 and DDR4 VTT bus termination.
In addition, the TPS51200-Q1 device provides an open-drain PGOOD signal to monitor the output regulation and an EN signal that can be used to discharge VTT during S3 (suspend to RAM) for DDR applications.
The TPS51200-Q1 device is available in the thermally-efficient VSON-10 package, and is rated both green and Pb-free. The device is specified from –40°C to 125°C.
Key Features
- Qualified for Automotive Applications
- AEC-Q100 Test Guidance With the Following Results:
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4B
- Input Voltage: Supports 2.5-V Rail and 3.3-V Rail
- VLDOIN Voltage Range: 1.1 V to 3.5 V
- Sink/Source Termination Regulator Includes Droop Compensation
- Requires Minimum Output Capacitance of 20-μF (typically 3 × 10-μF MLCCs) for Memory Termination Applications (DDR)
- PGOOD to Monitor Output Regulation
- EN Input
- REFIN Input Allows for Flexible Input Tracking Either Directly or Through Resistor Divider
- Remote Sensing (VOSNS)
- ±10-mA Buffered Reference (REFOUT)
- Built-in Soft Start, UVLO and OCL
- Thermal Shutdown
- Meets DDR, DDR2 JEDEC Specifications; Supports DDR3, DDR3L, Low-Power DDR3 and DDR4 VTT Applications
- VSON-10 Package With Exposed Thermal Pad
Application
- Automotive Power Supplies: It can be used in automotive power supplies to provide regulated voltage to various automotive systems, such as infotainment systems, engine control units (ECUs), and lighting systems.
- Industrial Power Supplies: The IC finds applications in industrial power supplies for voltage regulation in factory automation, robotics, and instrumentation equipment.
- LED Lighting: It is used in LED driver circuits to efficiently regulate the voltage for LED lighting systems in automotive and industrial settings.
- Battery-Powered Systems: The IC can be used in battery-powered systems to efficiently step down the battery voltage and extend battery life.
- Distributed Power Supplies: It is employed in distributed power supply systems for regulating voltage in distributed power architectures.
- Telecommunications Equipment: The IC can be used in telecommunications equipment and network infrastructure for power management.
- Point-of-Load (POL) Converters: It is suitable for use as a point-of-load converter in various electronic systems.
Specifications
Category | Integrated Circuits (ICs)Power Management (PMIC)Special Purpose Regulators | Series | Automotive, AEC-Q100 |
Applications | Converter, DDR | Voltage - Input | 2.38V ~ 3.5V |
Number of Outputs | 1 | Voltage - Output | - |
Operating Temperature | -40°C ~ 125°C | Mounting Type | Surface Mount |
Base Product Number | TPS51200 | Vin (min) (V) | 1.1 |
Vin (max) (V) | 3.5 | Rating | Automotive |
Iq (typ) (mA) | 0.5 | Features | S3/S5 Support |
Operating temperature range (°C) | -40 to 125 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 3,269
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $1.037 | $1.04 |
10+ | $0.875 | $8.75 |
30+ | $0.785 | $23.55 |
100+ | $0.685 | $68.50 |
500+ | $0.625 | $312.50 |
1000+ | $0.606 | $606.00 |
The prices below are for reference only.
this is very small pcb, looks like good product, not yet tested.