Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
00Mbps Data Rate
TSSOP (PW)-14Manufacturer:
Mfr.Part #:
TXB0104QPWRQ1
Datasheet:
Series:
Automotive, AEC-Q100
Translator Type:
Voltage Level
Channel Type:
Bidirectional
Number Of Circuits:
1
EDA/CAD Models:
Please fill in the short form below and we will provide you the quotation immediately.
Voltage-level translators address the challenges posed by simultaneous use of different supply-voltage levels on the same circuit board. This 4-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
The TXB0104 is designed so that the OE input circuit is supplied by VCCA.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
Category | Integrated Circuits (ICs)LogicTranslators, Level Shifters | Series | Automotive, AEC-Q100 |
Translator Type | Voltage Level | Channel Type | Bidirectional |
Number of Circuits | 1 | Channels per Circuit | 4 |
Voltage - VCCA | 1.2 V ~ 3.6 V | Voltage - VCCB | 1.65 V ~ 5.5 V |
Input Signal | - | Output Signal | - |
Output Type | Tri-State, Non-Inverted | Data Rate | 100Mbps |
Operating Temperature | -40°C ~ 125°C (TA) | Features | Auto-Direction Sensing |
Mounting Type | Surface Mount | Base Product Number | TXB0104 |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $0.971 | $0.97 |
10+ | $0.807 | $8.07 |
30+ | $0.724 | $21.72 |
100+ | $0.642 | $64.20 |
500+ | $0.517 | $258.50 |
1000+ | $0.493 | $493.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to
[email protected],
or fill below form to Quote for TXB0104QPWRQ1, guaranteed quotes back within
12hr.
Good quality spares and service ,thanks