Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
2-Channel Bi-Directional Voltage Converter 8-Pin SSOP Tape and Reel
SSOP (DCT)-8Manufacturer:
Mfr.Part #:
TXS0102DCTR
Datasheet:
Translator Type:
Voltage Level
Channel Type:
Bidirectional
Number Of Circuits:
1
Channels Per Circuit:
2
EDA/CAD Models:
All bill of materials (BOM) can be sent via email to
[email protected],
or fill below form to Quote for TXS0102DCTR, guaranteed quotes back within
12hr.
Please fill in the short form below and we will provide you the quotation immediately.
This two-bit non-inverting translator is a bidirectional voltage-level translator and canbe used to establish digital switching compatibility between mixed-voltage systems. It uses twoseparate configurable power-supply rails, with the A ports supporting operating voltages from 1.65V to 3.6 V while it tracks the VCCA supply, and the B ports supportingoperating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. Thisallows the support of both lower and higher logic signal levels while providing bidirectionaltranslation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all I/Os are placed in the high-impedancestate, which significantly reduces the power-supply quiescent current consumption.
To ensure the high-impedance state during power up or power down, OE should be tied toGND through a pulldown resistor; the minimum value of the resistor is determined by thecurrent-sourcing capability of the driver.
Category | Integrated Circuits (ICs)LogicTranslators, Level Shifters | Series | - |
Translator Type | Voltage Level | Channel Type | Bidirectional |
Number of Circuits | 1 | Channels per Circuit | 2 |
Voltage - VCCA | 1.65 V ~ 3.6 V | Voltage - VCCB | 2.3 V ~ 5.5 V |
Input Signal | - | Output Signal | - |
Output Type | Open Drain, Push-Pull | Data Rate | 24Mbps |
Operating Temperature | -40°C ~ 85°C (TA) | Features | Auto-Direction Sensing |
Mounting Type | Surface Mount | Base Product Number | TXS0102 |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $0.441 | $0.44 |
10+ | $0.350 | $3.50 |
30+ | $0.311 | $9.33 |
100+ | $0.263 | $26.30 |
500+ | $0.241 | $120.50 |
1000+ | $0.227 | $227.00 |
The prices below are for reference only.
Fast delivery, work as expected.The box and label on the box make it very easy to work with.