Payment Method
MIC1557YM5-TR
Programmable Timer IC 5MHz SOT-23-5
-
Manufacturer:
-
Mfr.Part #:
MIC1557YM5-TR
-
Datasheet:
-
Series:
IttyBitty®
-
Type:
555 Type, Timer/Oscillator (Single)
-
Frequency:
5MHz
-
Voltage - Supply:
2.7V ~ 18V
-
EDA/CAD Models:
Availability: 5158 PCS
Please fill in the short form below and we will provide you the quotation immediately.
MIC1557YM5-TR General Description
The MIC1555 IttyBitty® CMOS RC timer/oscillator and MIC1557 IttyBitty® CMOS RC oscillator are designed to provide rail-to-rail pulses for precise time delay or frequency generation.The devices are similar in function to the industry standard "555", without a frequency control (FC) pin or an opencollector discharge (D) pin. The threshold pin (TH) has precedence over the trigger (TR) input, ensuring that the BiCMOS output is off when TR is high.The MIC1555 may be used as an astable (oscillator) or monostable (one-shot) with separate threshold and trigger inputs. In the one-shot mode, the output pulse width is precisely controlled by an external resistor and a capacitor.Time delays may be accurately controlled from microseconds to hours. In the oscillator mode, the output is used to provide precise feedback, with a minimum of one resistor and one capacitor producing a 50% duty cycle square wave.The MIC1557 is designed for astable (oscillator) operation only, with a chip select/reset (CS) input for low power shutdown. One resistor and one capacitor provide a 50% duty cycle square wave. Other duty-cycle ratios may be produced using two diodes and two resistors. The MIC1555/7 is powered from a +2.7V to +18V supply voltage.The MIC1555/7 is available in the SOT-23-5 5-pin package, and is rated for -40°C to +85°C ambient temperature range.
Key Features
- +2.7V to +18V operation
- <1µA typical shutdown mode (MIC1557)
- 200µA typical (TRG and THR low) at 3V supply
- Timing from microseconds to hours
- "Zero" leakage trigger and threshold inputs
- 50% square wave with one Resistor, one Capacitor
- Threshold input precedence over trigger input
- <15O output on resistance
- No output cross-conduction current spikes
- <0.005%/°C temperature stability
- <0.055%/V supply stability
- Small SOT-23-5 surface mount package
Application
Clock & Timing, LED Lighting, Power ManagementSpecifications
Category | Integrated Circuits (ICs)Clock/TimingProgrammable Timers and Oscillators | Series | IttyBitty® |
Type | 555 Type, Timer/Oscillator (Single) | Count | - |
Frequency | 5MHz | Voltage - Supply | 2.7V ~ 18V |
Current - Supply | 350 µA | Operating Temperature | -40°C ~ 85°C |
Mounting Type | Surface Mount | Base Product Number | MIC1557 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 5158 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for MIC1557YM5-TR, guaranteed quotes back within 12hr.
Top Sellers
-
MCP7940N-I/SN
Microchip
MCP7940N-I/SN Real Time Clock with Serial Communication and 64Byte NVRAM in a 8-Pin SOIC Package
-
MCP79410-I/SN
microchip
Real-time Clocks (RTC) with I2C Interface
-
MCP7940NT-I/SN
Microchip
Battery-Backed I2C Real-Time Clock/Calendar with SRAM
-
SY89833LMG
MICROCHIP
Clock Fanout Buffer (Distribution), Translator IC 1:4 2 GHz 16-VFQFN Exposed Pad, 16-MLF®
-
MCP7940MT-I/SN
MICROCHIP
I2C Real-Time Clock/Calendar with SRAM.
Delivery 21 days, the product corresponds to the description and photo. Quality is good, works.